Product Overview
The CONNECTSERIES 1504D-G high-power IoT-enabled smart amplifier. This particular four-channel variant is capable of propelling 1,500 watts per channel across 2, 4, and 8 ohms, as well as 70 Vrms and 100 Vrms. Offered in both Network and Dante configurations, it's crucial to emphasize that the CONNECTSERIES 1504D-G is purpose-built for wired LAN connections and lacks compatibility with Wi-Fi connectivity.
Moreover, the CONNECTSERIES G-Model emerges as the pioneering professional amplifier line integrating Cloud connectivity. This novel feature empowers users to leverage Cloud resources for remote control, monitoring, notifications, and more, accessible from any personal device. Simply establish a connection between the amplifier and a network to initiate comprehensive system command and oversight.
LEA Professional CS1504D-G Features:
- 3 WAYS TO CONNECT: 1. Local Area Network
- WEB BROWSER-BASED UI: Works on any web browser on any device with no software downloads
- CLOUD CONTROL: Remote control and monitoring from anywhere in the world — no VPN needed.
- DIRECT LOW-Z & HI-Z: 70 V or 100 V selectable per channel
- SMART POWER BRIDGE: Double the power any any single channel without sacrificing other amp channels
- UNIVERSAL SWITCH-MODE POWER SUPPLY: with PFC — Operation from 100 VAC – 240 VAC +/-15%
- ANALOG BALANCED INPUTS: Fully routable via input matrix in Web UI or Cloud platform
- 96 KHZ ANALOG DEVICES DSP: with linear phase FIR filters, up to 4 seconds of delay, Input Routing, multiple 48dB/Oct crossover filters, 8 Parametric EQ filters, user-configurable speaker limiters, and real-time load monitoring
- EXTERNAL I/O PORT: For Remote ON/OFF and Fault Monitoring
- HIGHLY EFFICIENT CLASS-D OUTPUT STAGE: For low AC Current Draw
LEA Professional CS1504D-G Specifications:
- INPUTS: Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity
- THD+N: 0.1% (20 Hz to 20 kHz)
- FREQUENCY RESPONSE: 20 Hz to 20 kHz, +/- 0.5 dB @ 4 Ω, 8 Ω, 70 V, 100 V, -2.5 dB @ 20 kHz at 2 Ω
- SIGNAL TO NOISE LEVEL: 105 dB (20 Hz to 20 kHz referenced to 8 Ω)
- CROSSTALK: 70 dB (20 Hz to 20 kHz)
- AMPLIFIER OUTPUT CLASSIFICATION: Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
- DSP ARCHITECTURE: Analog Devices Sigma 96 kHz DSP Processor with 32-bit Core with Sample Rate Converters
- INPUT MATRIX: Routable matrix; any input to any output with primary and secondary input priority
- CROSSOVERS: Advanced DSP with Linear Phase Brickwall FIR Crossovers and up to 48dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
- PARAMETRIC EQ: 8 Band Parametric EQ per channel
- OUTPUT DELAY: 4 seconds per channel
- OUTPUT PROTECTION: DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
- USER ADJUSTABLE LIMITING: Peak Voltage and RMS Voltage
- LOAD MONITORING: Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
- CONTROL, MONITORING, NETWORKING
- USER INTERFACE: Web Browser User Interface, 3rd Party API control, or CLOUD control
- EXTERNAL I/O: External I/O In: Toggles Remote On/Off, External I/O Out: Indicates Amplifier Health
- AC MAINS: 100 VAC - 240 VAC +/- 15% 50 Hz or 60 Hz
- POWER SUPPLY: Universal Switch Mode Power Supply with Power Factor Correction
- DIMENSIONS (L X W X H): Product: 17.88” x 19” x 2U (362 mm x 482 mm x 2U) (362 mm x 482 mm x 2U)
- WEIGHT: 26 lbs / 11.8 kg
- COOLING: Front to Rear Variable Fan Speed Cooling, Fan Noise at idle is 50 dB @ 1 m, Fan Noise at 50% is 57 dB @1 m, Fan Noise at full speed is 63 dB @ 1 m
