Crown DCi 8|600N 8-Channel Power Amplifier with BLU Link, 600W at 4Ohms, 70V/100V

Part of Crown’s DriveCore™ Install Network series, DCI8-600N is a high-performance installation amplifier based on the proprietary DriveCore technology. Engineered to provide the flexibility required for 21st century installed sound applications, it's loaded with advanced features including analog and digital inputs, networking monitoring and control, programmable general purpose input/output (I/O) ports and digital signal processing. Balanced analog inputs paired with Harman's proprietary BLU link for digital audio transport allow you to specify a primary input, and if audio is lost the amp automatically switches to the other input to ensure your audio is seamless.

Remotely view performance of all networked DCi amplifiers and control as needed with the included HiQnet™ for monitoring and audio manipulation. Audio Architect software and the Powered by Crown app also work with DCi amplifiers— whose digital signal processing capabilities include Level/MAX Limiters, I/O EQ, Delay, Matrix Mixer and Speaker Line Monitoring. Configurable General-Purpose I/O Ports (GPIO) ports add control to key settings such as volume controls, recall presets, or to report errors to a master computer. With advanced versatility, DCi Series amplifiers are also compact and highly energy-efficient to exceed the demands of your installed sound needs.

Features

• Analog and Digital Inputs
• Network Monitoring and Control
• Programmable GPIO ports
• Digital Signal Processing

Specifications

• Channels: 8
  • 2 Ω: 300 W
  • 4 Ω: 600 W
  • 8 Ω: 600 W
  • 70 Vrms: 600 W
  • 100 Vrms: 600 W
• Frequency Response ( 8 Ω, 20 Hz - 20 kHz): +/- 0.25 dB
• BLU Link Input Signal to Noise Ratio (A-Weighted): > 104 dB
• Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35%
• Voltage Gain: 34 dB
• Damping Factor (20 Hz to 100 Hz): > 1000
• Input Impedance (nominal balanced, unbalanced): 10 kΩ, 5 kΩ
• Maximum Input Level before Compression: +20 dBu
• Load Impedance (Stereo/Dual Mode): 2 - 16 Ω; 70 Vrms and 100 Vrms
• Load Impedance Bridge Mono: 4 - 16 Ω; 140 Vrms and 200 Vrms
• Cooling: Continuously-variable speed forced air, front-to-back airflow
• Maximun Fan Noise (re dBA SPL @ 1M): 47
• Required AC Mains (+/- 10%): 100 V - 240 V ~ 50/60 Hz
• Dimensions: 19" x 3.5" x 14.25"
• Weight: 23.5 lbs.
• IEC Power Connector: 15 A
• Note: specifications and further information can also be found within the items located under the "Documentation" tab above.