Product Overview
Receive and decode full HD video (up to 1920x1200) over existing Category cabling at less than 10ms latency (for gigabit links) with the AMX NMX-DEC-N1233A-C decoder card. AMX's minimal proprietary compression packetizes your video into visually lossless streams that arrive at the destination instantly, displaying only single-frame latency, the same as HDBaseT. The N1233A-C card features separate HDMI and VGA/RGB inputs, supports PoE AES67, and has a separate SFP port that allows visually lossless video to be routed on a fiber-only network and extend signals beyond the reach of category cable. Plus, added USB connectivity enables users to extend USB over IP for touch-enabled and KVM applications.
Designed for use with AMX's N1000 encoders and the NMX-ACC-N9206 2U Rack Mount Cage, the N1233A-C card also receives embedded audio and outputs it via DVI-D, HDMI (through adapter), or 2-channel analog stereo. The card supports PoE (Power over Ethernet), eliminating the need for an external power supply.
An affordable local AV over IP switching solution utilizing off-the-shelf network switches, the AMX NMX-DEC-N22A-C allows for the creation of a small 2×1 seamless presentation switcher up to a mid-size video matrix, particularly in scenarios that require imperceptible latency.
AMX NMX-DEC-N1233A-C Includes:
- NMX-DEC-N1233A-C Decoder Card
AMX NMX-DEC-N1233A-C Features:
- Video scaling at output allows seamless switching from any sour
- 1 Frame Latency, Same as HDBaseT
- Minimal Proprietary Compression (MPC) – Visually lossless MPC algorithm
- Available option to disable all compression
- PoE eliminates the need for power supply
- Infrared emitter connection allows control of low-cost, IR-only display devices
- All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
- Decoder features two RJ45 network ports (one PoE)
- Available as a stand alone device, or card for use with NMX-ACC-N9206
AMX NMX-DEC-N1233A-C Specifications:
- Video
- Digital Video Input: Network video over Ethernet via RJ45 port or fiber via 1G SFP port
- Video Output: HDMI, DVI-D (through adapter)
- Formats: HDMI, DVI-D (through adapter), HDCP content protection support
- Output Resolutions: Supports most common HD up to 1920x1200.
- 640x480 @ 60Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, 1360x768 @ 60Hz, 1366x768 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1152x864 @ 60Hz, 1600x900 @ 60Hz, 1440x900 @ 60Hz, 1280x960 @ 60Hz, 1280x1024 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 23Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz
- Supported in component mode: 720x480 @ 59Hz, 720x480 @ 60Hz, 720x576 @ 50Hz, 1280x720 @ 50Hz, 1280x720 @ 59Hz, 1280x720 @ 60Hz, 1920x1080 @ 50Hz, 1920x1080 @ 59Hz, 1920x1080 @ 60Hz, 1920x1080i @ 50Hz, 1920x1080i @ 59Hz, 1920x1080i @ 60Hz
- Reduced blanking only: 1600x1200 @ 60Hz, 1920x1200 @ 60Hz
- Audio
- Input Signal Types: Network video and audio over Ethernet via RJ45 (audio at 48-kHz, standard SVSI audio stream or AES67, user selectable)
- Output Signal Types: Embedded audio on DVI-D or HDMI (through adapter)
- HDMI Audio Formats: 8ch PCM
- Analog Audio Format: Stereo 2-channel
- Digital-to-Analog Conversation: 16-bit 32 kHz, 44.1 kHz and 48 kHz (matched to Encoder settings)
- Latency
- Video Latency: 10 ms at 60 fps
- Audio Latency: standard SVSI audio stream = 17 ms(synced to video); AES67 =
- Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency.
- Note: Scaling adds one frame of latency (17ms at 60fps)
- Communications
- Ethernet:
- P0: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- P1: 1 Gbps port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling)
- Ports
- +12V 2A: One 12 Volt DC power input
- P0:
- 8-wire RJ45 female
- 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
- Provides the network connection to the Encoders and Decoders
- P1:
- SFP port (SFP fiber transceiver or direct attach cable not included) for MPC compressed networked AV video
- Provides network connection to the Encoders and Decoders
- IR:
- 2-pin terminal Phoenix connector
- Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
- RS232:
- 3-pin terminal Phoenix connector
- Provides a serial control interface. Full duplex communication. Available terminal speed settings: 9600-115200 baud rate
- Audio:
- 5-pin terminal Phoenix connector
- Provides user-selectable balanced/unbalanced output. Dedicated audio output
- HDMI Out: HDMI video output
- USB connectors (front panel): USB-B control input and two USB-A control inputs
- Controls and Indicators - Front Panel
- RESET Button:
- Recessed pushbutton
- Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- ID Button:
- Recessed pushbutton
- Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
- POWER LED:
- On solid (green) when operating power is supplied (via PoE or local power supply)
- This activity is also shown by the PWR LED on the rear panel
- STATUS LED:
- On flashing (green) when there is software activity
- This activity is also shown by the STAT LED on the rear panel
- Controls and Indicators - Rear Panel
- PWR LED: Same as POWER LED described above
- HDMI LED: On (green) when there is a connection to a valid video source
- STAT LED: Same as STATUS LED described above
- STRM LED: On (green) when the unit is streaming video
- Environmental
- Temperature: 32° to 104°F (0° to 40°C)
- Humidity: 10% to 90% RH (non-condensing)
- Heat Dissipation: Up to ~44 BTU/hr
- General
- Regulatory Compliance: FCC, CE, and NTRL
- Recommended Accessories: NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
- FG Numbers: FGN1233A-CD
