Product Overview
The DIN-AP4 is a secure, high‑performance control processor with a powerful 4-Series™ control engine designed specifically for DIN rail mounting applications. The DIN-AP4 is designed to integrate and automate technology within any modern networked home, commercial building, or government facility. DIN rail mounting provides a space‑efficient, cost‑effective, and modular solution for configuring complete automation systems using the DIN-AP4 along with additional Crestron and third‑party DIN rail mountable devices.
Crestron DIN-AP4 Features:
- 4‑Series™ control system with 1 GB SDRAM and 8 GB flash memory
- Embedded 4‑Series multicore CPU processor
- iPhone®, iPad®, and Android™ device control app support
- XPanel computer and web based control
- Modular programming architecture
- Onboard IR/serial, COM, I/O, relay, Cresnet® network, and Ethernet control ports
- High-speed USB 2.0 host port and memory card slot
- Crestron Fusion® software room monitoring and scheduling
- XiO Cloud® service provisioning and management
- Enterprise‑class network security and authentication
- SNMP V3 remote IT management support
- Native BACnet network/IP support
- Installer setup via software, web browser, or cloud
- IPv6 ready
- Integrates with Apple® HomeKit® technology
- Powered via 24 VDC power pack or PoE (Power over Ethernet)
- 9M wide DIN rail mountable
Crestron DIN-AP4 Specifications:
- Control Engine
- Crestron® 4-Series™; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs
- Communications
- Ethernet: 100 Mbps, auto‑switching, auto‑negotiating, auto‑discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1xX, SNMP, BACnet and IP1, IPv4 or IPv6, Active Directory® service authentication, HTTPS web server, HTTPS web browser setup and XiO Cloud® client, SMTP email client
- Cresnet® Network:Cresnet master mode
- USB:Supports USB mass storage class devices via the front panel USB 2.0 host port, supports computer console via the front panel USB 2.0 device port
- RS-232/422/485:For 2-way device control and monitoring, supports RS-232, RS-422, or RS-485 up to 115.2k baud with hardware and software handshaking
- IR/Serial: Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
- Memory
- DDR3 SDRAM: 1GB
- Flash: 8 GB
- Memory Card: Supports SD and SDHC cards up to 32 GB
- External Storage: Supports USB storage devices up to 1 TB
- Connectors and Card Slots
- I/O 1–8: (1) 9-pin 3.5 mm detachable terminal block; Comprises (8) Versiport digital input/output or analog input ports (referenced to GND); Digital Input: Rated for 0–24 VDC, input impedance 20k Ω, logic threshold >3.125 V low/0 and
- MEMORY: (1) SD memory card slot; Accepts one SD or SDHC card up to 32 GB for storage of log files
- IR/SERIAL 1–4: (1) 8-pin 3.5 mm detachable terminal block; Comprises (4) IR output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0–5 V) up to 115.2k baud; IRP2 IR emitters sold separately
- RELAYS 1–4: (1) 8-pin 3.5 mm detachable terminal block; Comprises (4) normally open, isolated relays; Rated 1 A, 30 VAC/VDC; MOV arc suppression across contacts
- COMPUTER: (1) USB Type B connector, female; USB 2.0 computer console port; For setup only
- PWR: (1) 2-pin 3.5 mm detachable terminal block; 24 VDC power input for power pack (sold separately)
- NET: (2) 4-pin 3.5 mm detachable terminal blocks, paralleled; Cresnet master port
- COM 1–2: (2) 5-pin 3.5 mm detachable terminal blocks; Bidirectional RS‑232/422/485 port; Up to 115.2k baud; hardware and software handshaking support
- G: (1) 6-32 screw; Chassis ground lug
- USB: (1) USB Type A connector, female; USB 2.0 port for storage devices
- LAN PoE: (1) 8-pin RJ-45 connector, female; 100BASE-T Ethernet port; PoE (Power over Ethernet) PD (Powered Device) port
- Controls and Indicators
- PWR: (1) Bicolor green/amber LED, indicates operating power is present; Amber indicates that the device is booting and is not yet ready to operate; Green indicates that the device is ready to operate
- NET: (1) Amber LED, indicates communication with Cresnet devices
- MSG: (1) Red LED, indicates processor has generated an error message
- HW-R: (1) Recessed miniature push button, initiates hardware reset
- SW-R: (1) Recessed miniature push button, initiates software reset
- LAN: (1) Green and (1) Amber LEDs; Green LED indicates Ethernet link status and connection speed; Amber LED indicates Ethernet activity
- Power
- Power Source Options: Power pack (sold separately) or PoE
- Power Pack: Must supply 24 VDC to 2-pin terminal block via flying leads; Use model PW-2407WUL or equivalent
- Power over Ethernet: IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) PoE Powered Device
- Available Cresnet Power 2.5 W maximum via PoE; 10 W maximum via 0.75 @ 24 VDC power pack
- Power Consumption: 9.7 W (not including any connected Cresnet devices)
- Environmental
- Temperature: 41 to 113 °F (5 to 45 °C)
- Humidity: 10% to 90% RH (noncondensing)
- Heat Dissipation: 33 BTU/hr
- Enclosure
- Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 9 DIN module spaces (162 mm)
- Dimensions
- Height: 3.57 in (91 mm)
- Width: 6.33 in (161 mm)
- Depth: 2.28 in (58 mm)
- Weight
- Compliance
- Regulatory Model: DIN-AP4;
- UL® Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device
