Product Overview
The NMX-ENC-N2312 Encoder and NMX-DEC-N2322 Decoder provide a flexible, feature-rich, and simple-to-deploy Digital Media Distribution and Switching solution that can be used in 4K applications with resolutions up to 4096x2160, with support for HDCP 2.2. This motion-based wavelet codec solution delivers video with nearly imperceptible latency at an incredibly low 200 Mb/s bandwidth allowing 4K distribution over standard gigabit Ethernet networks.
Any source can be sent to one or more displays by routing through layer-2 / layer-3 switches utilizing standard Cat5e cable. The NMX-ENC-N2312 includes standard features like input scaling, bi-directional serial, IR, embedded 7.1 audio, and KVMover- IP extension. It also comes in a card version compatible with SVSI's N9206 card cage for high-density applications.
Features
- Design Flexibility — Start as small as 1x1 and grow the system in increments of single sources and devices by simply adding additional encoders and decoders
- Advanced Security including SSL/TLS and HTTPS — Satisfies enterprise network security requirements.
- Infrared (IR) — Emitter connection allows control of IR-only display devices
- Fast Install — With Phoenix connectors for Power, IR, RS232 serial, and analog audio interfaces
- Balanced and Unbalanced Audio — Embedded 7.1 digital audio or balanced/unbalanced analog audio
- Pass Through HDMI — allows easy installation with local display such as desktop PC applicaitons
- Multiple Connection Options — RJ-45 and SFP network connectors and HDMI video connections
- KVM — Single USB-B for KVM applications
- Native NetLinx — NetLinx Studio will easily recognize the device
Specifications
- Video:
- Digital Video Input: HDMI 2.0, DVI-D* (through adapter), Dual-Mode DisplayPort (DP++)* (*These signal types are supported through a passive adapter)
- Analog Video Input: HD-15 VGA
- Video Output: Network video over Ethernet via RJ45 port or SFP via 1G SFP+ port, HDMI, DVI-D* (*These signal types are supported through a passive adapter)
- Formats:
- HDMI 2.0, DVI-D (through adapter), Dual-Mode DisplayPort (DP++), HDCP 2.2 content protection support, RGBHV
- DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
- Progressive Input Resolutions:
- Supports 4K30 4:2:0 and most common HD resolutions up to 1920x1200
- See NMX-ENC-N2312 Installation Manual for all supported resolutions
- HDMI and DVI (Progressive):
- Pixel clock between 27 MHz – 300MHz
- Minimum resolution of 720x480p60
- Maximum horizontal resolution of 4096 or a vertical resolution of 2160*
- Common acceptable resolutions include:
- 720x480p60 – 480p, 720x576@50, 800x600p60, 1024x768p60, 1280x720@60Hz - 720p60, 1600x1200@60Hz, 1920x1080@60Hz - 1080p60, 3840x2160(4:2:0)@30Hz - UHD30 aka 4K30, 4096x2160(4:2:0)@30Hz - DCI 4K30
- Interlaced Input Resolutions: Supports 1080i60
- HDMI and DVI (Interlaced):
- 1920x1080@50Hz - 1080i50
- 1920x1080@60Hz - 1080i60
- Note: Interlaced resolutions will be de-interlaced if scaled on the decoder; otherwise, the interlaced signal will pass through to the display
- Analog Input Resolutions:
- Supports most common HD resolutions up to 1920x1200
- See NMX-ENC-N2312 Installation Manual for all supported resolutions
- VGA:
- Pixel clock between 27 MHz - 165 MHz
- Minimum resolution of 640x480
- Maximum horizontal resolution of 1920 or a vertical resolution of 1200
- Common acceptable resolutions include:
- 640x480p60, 720x480p60 – 480p, 720x576@50,800x600p60, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz (reduced blanking)
- Notes:
- Input resolutions supported @60Hz refresh rates are also supported @59.94Hz
- The N2312 Encoder does not accept Composite or SVideo (YC)
- Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels
- Color Space: 4:2:0 4K30, 4:2:2 – HD
- LocalPlay/HostPlay: 8 playlists
- HostPlay: 1 image/list
- Note: Jumbo Frames Required
- Video Wall Construction: Supported within the NMX-DEC-N2322, the N2300 Series is not compatible with SVSI Windowing Processors at this time
- Network Video Recording: Not compatible with SVSI NVR at this time
- Audio:
- Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced)
- Output Signal Types: Ethernet, Embedded audio on HDMI or DVI-D (through adapter)
- HDMI Audio Formats: 8ch PCM
- Analog Audio Format: Stereo 2-channel
- Analog-To-Digital Conversion: 48 kHz
- Keyboard and Mouse: Keyboard & Mouse: Connect the Decoder to the keyboard and mouse, and an N2300 Series Encoder to the PC being controlled
- Latency:
- 17-ms at 60 fps for 1920x1080 and lower resolutions
- 34-ms at 30 fps for 4K30
- NOTE: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency. Scaling adds one frame of latency (17ms at 60fps)
- Switching: Up to 1.5s delay, not seamless
- Bandwidth: Approximately 160 Mb/s
- Note: Minimum bandwidth is 50 Mb/s for resolutions
- Communications:
- Ethernet - PO: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- Ethernet - P1: 1 Gbps port which accepts compatible fiber transceivers or direct attach cables, DHCP, Auto IP, and static IP
- HDMI: HDCP, EDID management
- Ports:
- +12V 2A: One 12 Volt DC power input
- PO:
- 8-wire RJ45
- 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
- Provides network connection, network AV video, and power to the Encoders and Decoders PoE power
- P1:
- 1-Gbps SFP+ port (SFP+ fiber transceiver or direct attach cable not included)
- Provides network connection and networked AV video
- IR IN (front panel): 3-pin terminal Phoenix connector. Provides Infrared (IR) input only and passes signal back to connected decoder (33-60 kHz; typically 39 kHz) IR receiver is necessary (not included)
- IR OUT:
- 2-pin terminal Phoenix connector
- Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter is necessary (not included)
- RS232:
- 3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication.
- Available terminal speed settings: 1200-115200 baud rate
- AUDIO:
- 5-pin terminal Phoenix connector which provides userselectable balanced/unbalanced input
- Dedicated audio input
- HDMI OUT: HDMI video output (passive pass-through from HDMI IN)
- HDMI IN: HDMI video input
- VGA IN: DB15 analog input
- Environmental:
- Temperature: 32° to 104°F (0° to 40°C)
- Humidity: 10% to 90% RH (non-condensing)
- Heat Dissipation: Up to ~44 BTU/hr
- Mounting Options:
- Regulatory Compliance: FCC, CE, and NTRL
- Recommended Accessories NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
- SKU: FGN2312-CD