AMX NMX-DEC-N3232-C H.264 Compressed Video over IP Decoder Card

Designed to decode H.264 compressed video from a WAN (Wide Area Network) input, the NMX-DEC-N3232-C card gives you an option for low bit rate distribution of 1080p60 content. Ideal for use with video to desktop or third-party hardware endpoints like Roku, Amino, or Google TV.

Paired with N3000 series encoders (sold separately), the NMX-DEC-N3232-C creates a system that makes storing and accessing video from the cloud a cost effective logical solution.

The NMX-DEC-N3232-C supports PoE on one of its two RJ45 network ports, eliminating the need for an external power supply. Designed for use with the six-slot NMX-ACC-N9206 2U rack mount cage, the card can also be powered via the rack cage. The N3232-C decoder card also features a separate HDMI output and has a separate SFP port that allows visually lossless video to be routed on a fiber-only network and extend signals beyond the reach of category cable.

AMX NMX-DEC-N3232-C Applications:

• Distance learning
• Multi-site enterprise
• IPTV streaming
• Digital signage

AMX NMX-DEC-N3232-C Features:

• Power Over Ethernet eliminates the requirement for local power supply and speeds installation
• Infrared emitter connection allows control of low-cost, IR-only display devices
• All N-Series encoders and decoders have on-board, built-in control capability
• Unlimited Scalability
• Available as a stand alone device, or card for use with NMX-ACC-N9206

AMX NMX-DEC-N3232-C Specifications:

• Video Input: Network video over copper via RJ45 port or fiber via 1G SFP port
• Video Output: HDMI, DVI-D (through adapter)
• Formats: HDMI, DVI-D (through adapter), HDCP content protection support
• Input Resolutions: Supports most common HD up to 1080p60.
• *720x480 @ 59Hz, 640x480 @ 60Hz, *720x480 @ 60Hz, *720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, *1280x720 @ 50Hz, *1280x720 @ 59Hz, *1280x720 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, *1920x1080 @ 50Hz, *1920x1080 @ 59Hz, *1920x1080 @ 60Hz, *1920x1080i @ 50Hz, *1920x1080i @ 59Hz, *1920x1080i @ 60Hz
  • *supported in component mode
• Audio
  • Input Signal Types: Network audio over Ethernet
  • Output Signal Types: Embedded audio on HDMI or DVI-D (through adapter)
  • HDMI Audio Formats: Stereo 2-channel
  • Analog Audio Formats: Stereo 2-channel
  • Latency: 175 ms at 60 fps
  • Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency.
  • Note: Scaling adds one frame of latency (17ms at 60fps)
• Ethernet
  • P0: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
  • P1: 1 Gbps port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling)
  • HDMI: HDCP, EDID management
• Ports
  • +12V 2A: One 12 Volt DC power input.
  • P0: 8-wire RJ45 female, 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port, Provides network connection, network AV video, and power to the Encoders and Decoders
  • P1: SFP port (SFP fiber transceiver or direct attach cable not included), Provides the network connection and network AV video
  • IR: 2-pin terminal Phoenix connector, Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
  • RS232: 3-pin terminal Phoenix connector, Provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate
  • AUDIO: 5-pin terminal Phoenix connector, Provides user-selectable balanced/unbalanced output. Dedicated audio output
  • HDMI OUT: HDMI video output
  • USB connectors (front panel): One USB-A control inputs
  • Front Panel Controls and Indicators
  • RESET Button: Recessed pushbutton, Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
  • ID Button: Recessed pushbutton, Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
  • POWER LED: On solid (green) when operating power is supplied (via PoE or local power supply), This activity is also shown by the PWR LED on the rear panel
  • STATUS LED: On flashing (green) when there is software activity, This activity is also shown by the STAT LED on the rear panel
• Rear Panel Controls and Indicators
  • PWR LED: Same as POWER LED described above
  • HDMI LED: On (green) when there is a connection to a valid video source
  • STAT LED: Same as STATUS LED described above
  • STRM LED: On (green) when the unit is streaming video
• Environmental
  • Temperature: 32° to 104°F (0° to 40°C)
  • Humidity: 10% to 90% RH (non-condensing)
  • Heat Dissipation: Up to ~44 BTU/Hr
• Regulatory Compliance: FCC, CE, and NTRL
• Recommended Accessories: NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
• FG Numbers: FGN3232-CD