RDL Product Financing

An unbalanced input transformer with unbalanced stereo inputs to summed balanced mono output RDL's TX-J2 is the ideal choice for installations where the passive mixing of 2 unbalanced line-level audio sources to feed a balanced (or unbalan ...

The D SERIES-BTN44 modules are Dante networked, wall-mounted audio interfaces that include bidirectional Bluetooth audio, unbalanced analog stereo or mono audio inputs and outputs, and a balanced or unbalanced line-level output. Stereo aud ...

Radio Design Labs' FP-MX4 is a single channel audio mixing module featuring four identical inputs. Each input accepts either a mic or line level source. The output section provides four mixing potentiometers corresponding to the four input ...

The D SERIES-BT1A modules are Bluetooth audio receiving modules compatible with RDL® Format-A twisted pair receivers. When paired with a compatible Bluetooth enabled device, the module receives stereo audio from the Bluetooth source. The ...

The DDB-RN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input, left and right RCA jack inputs and one stereo Mini-jack line output on the front panels, plus t ...

Radio Design Labs' RU-MLB4 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference t ...

ST-ACR1 module is designed to switch on LINE-LEVEL sources. Its relatively short release delay time makes it the optimum choice for voice applications. Each of the ST-ACR products is an Audio Controlled Relay in the group of STICK-ON serie ...

The AV-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels. Special software is not required to configure the AV-XMN4. Each XLR input is equipped with a switch to set the gain for dynamic or conden ...

The Radio Design Labs DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not req ...

Radio Design Labs' TX-A2 is the ideal choice in installations requiring passive isolation and level attenuation between a professional balanced line-level mono source and consumer equipment unbalanced inputs. The TX-A2 is a complete unbala ...

The Radio Design Labs DDB-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DDB-BN22 ...

The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unba ...

Radio Design Labs' TX-PA40D features two unbalanced line level inputs on high-reliability gold plated phono (RCA) jacks. A front-panel recessed gain control trimmer permits setting the desired amplifier output level for each channel. The g ...

The SF-DN4, part of the SysFlex® series from Radio Design Labs, is a Power-over-Ethernet (PoE)-powered digital audio interface that enables the conversion of 2 stereo digital audio sources into 4 Dante® network audio channels, automatica ...

The Radio Design Labs DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. ...

The Radio Design Labs TX-TPR1A is a single-pair audio receiving module compatible with RDL Format-A twisted pair products. A front-panel switch set during installation determines which of the three Format-A pairs is buffered to feed the mo ...

If you need to feed audio from a 70V distributed loud speaker system into a line-level device at a remote location—or—if you need to add a few more loudspeakers than your existing 70V amplifier can drive, but have no convenient line-le ...

The RDL SF-BNC2 is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5 mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and st ...

Radio Design Labs' TX-PCR1 is ideal where switching needs to be controlled from a constant voltage amplified audio source. The module will trigger on any program material, with paging sources being the most common. The TX-PCR1 includes bot ...

Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products. Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, CSA) Effi ...

The RDL TX-TPR3A is a three-pair audio receiving module compatible with RDL Format-A twisted pair products. Three signal pairs A, B and C correspond to three outputs and the audio signal received on each pair of the RJ45 INPUT jack feeds t ...

The D SERIES-BT1A modules are Bluetooth audio receiving modules compatible with RDL® Format-A twisted pair receivers. When paired with a compatible Bluetooth enabled device, the module receives stereo audio from the Bluetooth source. The ...

The D-CIJ3 is the perfect choice in installations requiring the passive mixing of two unbalanced line level audio sources to feed a mono balanced (or unbalanced) audio line. The D-CIJ3 is a complete unbalanced line-level audio input module ...

Radio Design Labs' PS-24V3A is a Switching Power Supply for use with numerous RDL Modules. It features a 24 VDC, 3 A, DC Plug (made to replaces RDL's PS-24V2A). It includes a North American-type AC cord. RDL PS-24V3A Features: 24 VDC Switc ...