RDL Video & Photo Product Financing

Radio Design Labs' FP-AVDA4 is the perfect choice in applications where consumer format audio and video signals need to be distributed simultaneously. Audio and video inputs and outputs are made on the top panel phono jacks. The FP-AVDA4 h ...

Radio Design Labs' TX-MVX features 2x1 video selection or 1x2 video routing. The TX-MVX allows for manual switching, remote control, NTSC/PAL operation and has BNC connectors. Use the TX-MVX individually in NTSC or PAL systems, or combine ...

Radio Design Labs' DS-TPS3A module is a three-pair audio sending module that is compatible with RDL Format-A twisted pair products. This module is designed to be mounted in wall boxes, cabinets or other enclosures that allow users to conne ...

Radio Design Labs' D-TPS2A module is a two-pair audio sending modules compatible with RDL Format-A twisted pair products. This module is designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio s ...

Radio Design Labs' RU-VSX4 is the ideal choice in most applications where four video signals need to be switched to a single output. The RU-VSX4 has two rear panel jacks for each of the four video bridging input stages. One jack is for the ...

For driving low video signals and driving video lines up to 2000 feet. Radio Design Labs' TX-VLA1 is the ideal choice in installations where video signals are being fed into long cables, or where a low video signal needs to be amplified. T ...

Switches to auxiliary video input upon loss of primary video input. Detects and alarms on loss of video. Radio Design Labs' TX-AVX is the ideal choice in installations where automatic switchover to an alternate video source is needed when ...

Radio Design Labs' RU-VA2 is the optimum choice where connectorized, rack-mounted video attenuation is needed. This unit features two separate, passive isolated channels. A single input jack is provided for each attenuator. The output jack ...

Radio Design Labs' WH1 allows the mounting of up to 6 power supplies together in one location. NOTE: Power strip shown in picture above NOT included. Includes 1 mounting bracket for 6 supplies 6 UL/CSA 6" power cords 6 sets of detachable m ...

Radio Design Labs' FP-VDA4 is the ideal choice in many applications where video signals need to be distributed. Video input and output connections are made on the top panel BNC jacks. Power connections are made using either the full-size b ...

Radio Design Labs' RU-SC2 is part of the group of versatile RACK-UP products from Radio Design Labs. The RACK-UP series features the advanced circuitry for which RDL products are known, combined with accessible, user-friendly controls and ...

Radio Design Labs' RU-AVX4 is the perfect choice in installations where a single set of audio/video signals needs to be selected from up to 4 consumer format (phono jack) video and audio sources. Video signal quality, audio performance and ...

The PM-1T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates up to two FP-PA20 Audio Power Amplifiers (for stereo operation) and two PS- ...

The EZ-VDA2B is a composite video distribution amplifier with two outputs. The input and outputs are all 75 O on BNC connectors. If the outputs are connected to long coaxial cables (typically 100 to 1000 feet) the front-panel gain and equa ...

The EZ-VDA3B is a composite video distribution amplifier with three outputs. The input and outputs are all 75 O on BNC connectors. If the outputs are connected to long coaxial cables (typically 100 to 1000 feet) the front-panel gain and eq ...

Radio Design Labs' PM-3TW is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates any RU, TX, FP or STICK-ON Audio Power Amplifier and its as ...

Radio Design Labs' DS-TPS1A module is a single-pair audio sending module compatible with RDL Format-A twisted pair products. This module is designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audi ...

Radio Design Labs' EZ-AVX4 is a stereo audio and composite video source selector. Line-level audio and video outputs are provided on RCA jacks. This unit is ideal as a four input source selector feeding an associated video monitor or recor ...

Radio Design Labs' D-TPR1A module is a single-pair audio receiving module that is compatible with RDL Format-A twisted pair products. This module is designed to be mounted in wall boxes, cabinets or other enclosures that allow users to con ...

Radio Design Labs' DS-TPR1A module is a single-pair audio receiving module that is compatible with RDL Format-A twisted pair products. This module is designed to be mounted in wall boxes, cabinets or other enclosures that allow users to co ...

The Radio Design Labs D-TPS8A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect a ...

Radio Design Labs' -TPS6A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products. The front panel features two gold plated phono jacks intended for stereo consumer line level audio sources, along with a ...

The Radio Design Labs D SERIES-TPS8A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to co ...

Radio Design Labs' D SERIES-TPS2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to conne ...