Switchers, Selectors Audio, Line Level

The Radio Design Labs D-RCX1 is a room control for the RCX-5C room combiner. This control is designed to mount in individual rooms to control source and level and features music or local/combined source selection. The long life pushbuttons ...

Radio Design Labs' ST-SSR1 is part of a group of products in the STICK-ON series from Radio Design Labs. The durable bottom adhesive permits quick, permanent mounting nearly anywhere, or use it with RDL's racking accessories. The ST-SSR1 o ...

The Radial Engineering Relay Xo is a 1-in, 2-out balanced audio switcher designed to route the output of a microphone to two different audio inputs. This, for instance, enables a vocalist to switch his mic between the main PA system and th ...

This is part of Sescom's series of new economical AB-Switches that are designed to last and not break the bank! These helpful AB switches can also function as input and output expansions for any of your equipment. Designed to save you time ...

Radio Design Labs' ST-SX4 is a remote-controllable unbalanced audio source selector in the group of STICK-ON series products by Radio Design Labs. These products are designed for quick, convenient installation, and reliable operation in a ...

The Atlas Sound WPD-MIX42RT is a decor style wall plate that is designed for remote activation of the TSD-MIX42RT mic/line mixer. The WPD-MIX42RT features an audio source slide selector as well as a source volume control. The unit includes ...

The Sescom SES-AB-SWITCH Flip2 A/B switch addresses the prevalent challenge of selecting between two 3.5mm stereo sources, including iPods, computers, Android and iPhone smartphones, iMacs, MP3 players, and PC sound card outputs. It operat ...

Radial Engineering's Gold Digger is a 4-channel mic selector that enables the engineer to quickly compare the sound of four different microphones while sharing the same preamp. A 'straight wire' passive circuit design is void of any audio ...

The D SERIES-TPRX3A is a three-pair audio receiving and switching module compatible with RDL Format-A twisted pair products. Three audio sources are available, corresponding to the three signal pairs A, B and C. The front panel of the -TPR ...

The Radio Design Labs D SERIES-SFRC8 Room Control Station is a SourceFlex listening station for wall mounting in a room, providing source selection and volume control from up to 8 audio sources. A numeric display shows the selected source. ...

The Radio Design Labs D SERIES-TPRX3A is a three-pair audio receiving and switching module compatible with RDL Format-A twisted pair products. Three audio sources are available, corresponding to the three signal pairs A, B and C. The front ...

The front panel of the DB-RT2 features two pushbuttons with two associated LEDs. Upon initial power-up, the OFF mode is selected. Touching the other button de-selects OFF and immediately selects ON. An LED adjacent to each button shows whi ...

The DS-RCS4 is the ideal choice where sources are to be selected from a single or from multiple remote control locations, and visual indication is desired. The DS-RCS4 is designed to directly interface with RDL control modules, such as the ...

Room Control for RCX-5C Room Combiner, Stainless Steel RDL DS-RCX1 Features: Mounts in individual room to control source and level Long life pushbuttons Music or Local / Combined source selection Up / Down pushbutton level adjustment with ...

The D SERIES-RT2 is part of the RDL accessories group and is designed as a functional and visual complement to many other RDL remote controls such as the D-RLC2, D-RLC3 or D-RLC10K Remote Level Controls. The -RT2 is a wall-box mounted remo ...

The SFP-SWRT-LR small form-factor pluggable module allow reliable long-distance communication of multiple channels of 96kHz audio data with up to a maximum of 10 kilometers, significantly enhancing performance, dependability, and flexibili ...