Product Overview
The SXP118 is a compact yet powerful subwoofer designed to enhance the low-frequency performance of CDD-LIVE! full-range systems, extending the operating range down to 40Hz for impactful bass and increased headroom. Featuring a long-excursion 18” (460mm)/4” (100 mm) voice coil driver with a water-resistant cone and triple roll surround in a compact reflex enclosure, it ensures high output with minimal power compression and distortion. The four reflex ports, with a large frontal area, effectively reduce turbulent air noise even at very high levels. With a maximum SPL capability of 135dB peak at 1 meter, the SXP118 is ideal for theatre, portable live sound, and premium installations requiring maximum output from a compact enclosure.
Martin Audio SXP118B Applications:
- Live sound reinforcement
- Theatre sound
- Corporate AV events
- Fixed installations in concert halls, ballrooms and HoW
- Bars and clubs
- Outdoor restaurant, bar and hotel entertainment areas
- Concourses and Theme Parks
Martin Audio SXP118B Features:
- Compact, self-powered subwoofer
- 1 x 18” (460mm) driver with 4” (100mm) voice coil
- Onboard Class D amplification and DSP
- Dante™ Digital Audio networking
- Global mains operation with Power Factor Correction
- Tour-grade plywood enclosure with flying inserts
- IP24 rating option with rain cowl
Martin Audio SXP118B Specifications:
- Type: Compact, direct radiating powered subwoofer
- Frequency response: 47Hz – 150Hz ±3dB, -10dB at 41Hz
- Driver: 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
- Input sensitivity: -20dBu for 100dB SPL
- Maximum spl: 132dB continuous / 135dB peak
- Dispersion: Omnidirectional / or Cardioid (paired)
- Crossover: active, presets mono-pole or cardioid (paired)
- Module audio input
- Connectors: Female xlr input, male xlr link output, Dante audio neutrik® ethercon
- Analog input impedance: 20 kω balanced to ground
- Maximum analogue input level: 24.6 vpp (+21dbu), over voltage protected
- Internal processing:
- Multi-channel dsp, programmable via tcp/ip using vu-net software
- peq/shelving filters
- up to 48db/oct hpf
- up to 200ms input delay
- pre-set selection via rear panel switch
- Network
- Connectors: 2x neutrik ® ethercon rj45
- Protocol: Tcp/ip and udp/ip
- Amplifier
- Type: 2 channel switch-mode, class D, Bridged Tied
- Peak output power: 2000W total
- Average efficiency: 89%
- Cooling: External fan
- Maximum ambient temperature: 40°c (104°f) for full output
- Power supply
- Type: Switch mode, fixed frequency with pfc
- Ac input operating range: 85 – 265v ~ ac, 50 - 60hz
- Power factor: > 0.98
- Nominal power consumption: 125w
- Mains connector: Neutrik® powercon true1
- Mechanical
- Enclosure: Extensively braced multi-laminate plywood.
- Finish: Durable Polyurea Coating
- Protective grille: Black perforated Zintec
- Fittings:
- Two skids on base, with mating channels on top
- 16 x M8 inserts for optional castors
- M20 top-mounted thread plate for pole mounting
- 16 x M10 mounting points
- 2x Bar handles, 1 on each side
- 4x fittings for optional transit cover
- Ip rating: Ip24 factory option available
- Dimensions(HxWxD): 20x"23.62"x24.86"
- Weight: 103 lbs (46.5 kg) w/o castors 50kg (110 lbs) with castors