RF Venue RF-EXPLORER-PRO Touchscreen RF Spectrum Analyzer

The RF Explorer® Pro is a powerful and versatile tool that takes your wireless system design, deployment, and monitoring to the next level. With its 3rd generation technology, this high-performance tool offers advanced functionality accessible via an intuitive touch screen. The RF Explorer® Pro comes equipped with an integrated Spectrum Analyzer, Signal Tracking Generator, and WiFi Analysis features to support any wireless mic or in-ear monitor system. It also offers a dedicated WiFi Analyzer mode for convenient visualization of often congested frequency bands. Quickly identify low-traffic channels for configuring your system to avoid problems on stage or at the Front Of House. The SMA Spectrum analyzer input allows you to interface with a BNC adapter or jumper cable to analyze RF from any part of your wireless system. Patch into antenna distros, receive antennas, bandpass filters, RF over fiber converters, and other sources to assess the performance of your system, debug issues, and fine-tune performance. An HDMI out allows for the connection of an external display to monitor your system's RF performance in real-time during an event or to gauge the actual coverage range pre-show to avoid interruptions and dropouts. RF Explorer® Pro. Design, deploy, and perform with confidence.

RF Venue RF-EXPLORER-PRO Includes:

• USB Charger
• Padded Carry Case

RF Venue RF-EXPLORER-PRO Features:

• Built-in Frequency Coordination
• Dedicated Wi-Fi Analyzer Mode
• HDMI Output For External Monitor Connection
• Continuous Frequency Monitoring
• Record/ Save /Replay Spectrum Data
• Remote Network Control

RF Venue RF-EXPLORER-PRO Specifications:

• Frequency range: 15MHz to 3.3GHz (baseline) 15MHz to 6.1GHz (license 6G) 15MHz to 7.5GHz (license 7G)
• Frequency Span: 0 (zero span) 500KHz to 6GHz (sweep)
• RBW: 3Khz – 2.5MHz Future firmware upgrade will enable 100Hz – 2.5MHz
• VBW: Automatic
• Low Frequency Support: 100KHz – 240MHz with external RF Explorer Upconverter module Frequency resolution: 1KHz Future firmware upgrade will enable 100Hz
• Sweep Time: 3GHz / 280ms With RBW 2.5MHz
• Sweep Points: 512-65,000
• Frequency stability (typical): TCXO ±0.5ppm
• Amplitude stability and accuracy (typical): ±1.5dB
• Factory Calibration: 3K reference points
• Frequency accuracy (Internal reference): TCXO ±1ppm
• Aging: ±1ppm/year
• Displayed Frequency accuracy: Span/(Sweep Points-1)
• Amplitude resolution: 0.5dB Future firmware upgrade will enable 0.25dB
• Dynamic range (Depending on RBW and Band): Direct: -110dBm to +10dBm Preamplifier LNA: -130dBm to -30dBm Attenuator: -80dBm to +33dBm
• Absolute Max input power: +33dBm internal Attenuator selected
• Display Average Noise Level: -130dBm typical LNA
• Noise Floor: -160dBm/Hz typical LNA
• WiFi Analyzer: 2.4Ghz / 5.8GHz
• CPU: Advanced Intel 64bits
• DSP: High Performance Dual DSP 32bits+16bits
• Save/Replay: 100,000 Sweeps on Memory Unlimited Sweeps on File
• File Export: Compatible CSV and Binary formats Suitable for WSM/WWB6/Excel/Matlab