Product Overview
The PT-MZ17KL is a projector in the 17,000lm-class, providing full brightness on AC 100–240 V power and eliminating the need for high-voltage power supply installation. The MZ series features Near Field Communications (NFC) function, enabling quick setup of the projector's settings without powering it up. A comprehensive range of optional lenses is available, including the ET-EMU100 Ultra-Short-Throw Zoom Lens for large-screen projection in confined spaces. Additionally, pre-activated Geometry Pro upgrade kits expand the projectors' built-in functions, allowing adjustments from a PC for flexible installation.
Panasonic PT-MZ17KLBU7 Features:
- Small, Light, and Quiet 17,000lm LCD Projector
- Long-Life Energy-Saving Design Minimizes Problems
Panasonic PT-MZ17KLBU7 Specifications:
- Dimensions (W x H x D): Approx. 650 x 185 x 440 mm (25 19/32˝ x 7 9/32˝ x 17 5/16˝ ) (excluding feet and protrusions), 650 x 211 x 440 mm (25 19/32˝ x 8 5/16˝ x 17 5/16˝ ) (excluding protrusions, feet at shortest position)
- LENS: Optional (no lens included with this model)
- Resolution: WUXGA (1920 x 1200 pixels)
- Operating environment: Operating temperature: 0–45 °C (32–113 °F)*9, operating humidity: 10–80 % (no condensation)
- Applicable software: Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Projector Network Setup Software, Smart Projector Control for iOS/Android™
- Contrast Ratio: 3,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] set to [3].)
- Power supply: AC 100–240 V, 50/60 Hz
- Light source: Laser diode
- Terminals | LAN: RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
- Terminals | DC OUT: USB connector (Type A) x 1 for power supply (Output: 5 V / 2 A)
- LCD panel | Panel size: 25.4 mm (1.0 in) diagonal (16:10 aspect ratio)
- LCD panel | Drive method: Active matrix method
- Terminals | SDI IN: BNC x 1: 3G/HD-SDI input
- Terminals | HDMI IN: HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input5), CEC supported
- Terminals | DIGITAL LINK: RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2],Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input*5 )
- Terminals | REMOTE 2 IN: M3 x 1 for wired remote control
- Terminals | SERIAL/MULTI PROJECTOR SYNC IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
- Terminals | SERIAL/MULTI PROJECTOR SYNC OUT: D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
- Weight: Approx. 22.5 kg (49.6 lbs)
- Terminals | REMOTE 1: D-sub 9-pin (female) × 1 for external control (parallel)
- Filter: Included (Estimated maintenance time: approx. 20,000 hours *7)
- Operation noise: 38 dB (NORMAL), 32 dB (QUIET)
- Projector type: LCD projector
- Lens shift | Vertical (from center of screen): ±60 % (+50 %, -20 % with ET-EMU100, ±40 % with ET-EMW200, ±50 % with ET-EMW300) (powered)
- Lens shift | Horizontal (from center of screen): ±20 % (±19 % with ET-EMW200) (powered)
- Center-to-corner zone ratio: 85 %
- Time until light output declines to 50 %: 20,000 hours (NORMAL/QUIET)
- Terminals | Remote 2 Out: M3 x 1 for link control (for wired remote control)
- Light Output: 16,500 lm
- LCD Panel | Display System: Transparent LCD panel (x 3, R/G/B)
- LCD panel | Pixels: 2,304,000 (1920 x 1200 pixels)
- Terminals | USB: USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memory
- Power consumption | Maximum power consumption: 950 W (9.6–4.0 A) (960 VA)
- Power consumption | On-mode power consumption (Light power)[Normal]: 880 W (AC 100–120 V),850 W (AC 200–240 V)
- Power consumption | On-mode power consumption (Light power)[Quiet]: 580 W (AC 100–120 V),560 W (AC 200–240 V)
