Bogen C60 [Restock Item] 4x1 Mixer / Amplifier 60W, 70V

The Bogen Communications Classic Series C35, C60 and C100 are mixer amplifiers intended for medium to large applications. The C35 is rated at 35 watts. The C60 and C100 are rated at 60 and 100 watts, respectively. The amplifiers mix 4 inputs: 2 Mic/1 Aux and Tel, or 1 Mic/2 Aux and Tel. A second telephone input can be added to one of the Mic channels or Aux input using an accessory transformer (model WMT-1A). A front panel switch selects Mic 2 or Aux 1 input. A built-in circuit provides microphone precedence over the Aux 2 input when a customer-supplied SPST switch is actuated. Each input has its own volume control; treble and bass controls are included to adjust the tonal balance of the output. The Tel channel includes a screwdriver adjustable volume controls on the rear panel. Balanced and unbalanced outputs are provided for 4 W, 8 W, and 16 W speaker systems and for 25 volt and 70 volt constant voltage systems. Output jacks permit patching in a tape recorder or an additional booster amplifier, or feeding a 500/600 W telephone line when an accessory transformer is used. The Classic Series are designed with all silicon semiconductors and advanced complementary transistor circuitry to assure highest reliability. Thermal and electrical protection is built in and is designed to protect thaw amplifier against abnormal heat build-up and short circuited or overloaded outputs

This is a Restock item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

Bogen C60 [Restock Item] Applications:

• WMT-1A - Telephone line-matching transformer
• RPK50 - Rack panel kit for C35/60/100, 19" x 2 spaces
• RPK535B - Rack panel kit for C10/20/10MOH/20MOH, 19"x 2 spaces
• WMK1 - In-wall mounting kit for C10/20/10MOH/20MOH

Bogen C60 [Restock Item] Includes:

Bogen C60 [Restock Item] Features:

• • 60 watts
  • 4 inputs: 1 MIC (Lo-Z), 1 AUX (Hi-Z), 1 TEL, plus 1 selectable MIC or AUX
  • Each input controlled by an independent volume control
  • Treble and bass controls
  • AUX muting by external contact closure for pushto- talk mic’s
  • Tel input for telephone paging applications
  • TEL input voice-activated (VOX) mute over AUX input
  • Variable threshold for TEL input voice-activated AUX mute
  • Audio output for tape recorder or booster amplifier
  • Outputs for 4-ohm (direct), 8-ohm, and 16-ohm, 25V and 70V speaker systems (transformer coupled)
  • Output jack to connect a tape recorder or booster amplifier
  • Output jack to connect a general-purpose 600-ohm matching transformer (model WMT1A)
  • Thermal protection and electronic shutdown
  • Rack mountable with accessory mounting kit (model RPK50)
  • UL and CSA listed

Bogen C60 [Restock Item] Specifications:

• • System
    • Working Range: 91 m (300 ft) Line of Sight (actual range depends on RF signal absorption, reflection and interference)
    • Audio Frequency Response: 50 to 15,000 Hz (dependent on microphone type)
    • Total Harmonic Distortion, Ref. ±33 kHz deviation with 1 kHz tone: 0.5%, typical
    • Dynamic Range: 100 dB, A-weighted, typical
    • Operating Temperature: -18°C (0°F) to 57°C (135°F) (battery characteristics may limit this range)
    • Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.
  • BLX88 Dual Wireless Receiver
    • Output Impedance
      • XLR connector: 200 Ω
      • 6.35 mm (1/4") connector: 50 Ω
    • Audio Output Level, Ref. ±33 kHz deviation with 1 kHz tone
      • XLR connector: –27 dBV (into 100 kΩ load)
      • 6.35 mm (1/4") connector: –13 dBV (into 100 kΩ load)
    • RF Sensitivity: -105 dBm for 12 dB SINAD, typical
    • Image Rejection: >50 dB, typical
    • Dimensions (H x W x D): 1.50 in. X 12.13 in. X 3.98in. (38 mm X 308 mm X 101 mm)
    • Weight: 15.1 oz. (429 g)
    • Housing: Molded ABS
    • Power Requirements: 12–15 V DC @ 235 mA (BLX88, 320 mA), supplied by external power supply (tip positive)
  • BLX2/SM58 Handheld Wireless Microphone Transmitter
    • SM58 industry-standard vocal microphone
    • Audio Input Level
      • 0dB: -20 dBV maximum
      • -10dB: -10 dBV maximum
    • Gain Adjustment Range: 10 dB
    • RF Transmitter Output: 10 mW, typical (varies by region)
    • Dimensions (L x Dia.): 8.82 in. X 2.09 in. (224 mm X 53 mm)
    • Weight: 7.7 oz. (218 g) without batteries
    • Housing: Molded ABS
    • Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
    • Battery Life: up to 14 hours (alkaline)