CIOKS CIO-AC10 10-Output Multi Volt Isolated Section Guitar Pedal Power Sup

Offering the choice of two AC, five DC, and one convertible section, the AC10 allows you to power a variety of pedals with disparate power requirements from a single compact supply. In addition to powering your DC stomps, you can drive tube pedals from Blackstar, Electro-Harmonix, DigiTech, and more without the need for an off-board AC source. The AC sections each provide 800mA each and are fully isolated from the DC sections to feed your pedals with the clean power that lets your tone shine through. If you pedal swap for different gigs and need more DC, you can convert one of the AC outlets to a 600mA DC outlet to accommodate an additional pedal. All DC outlets are individually isolated and a toroidal transformer ensures a high degree of EMF shielding to keep the signal pure. The AC10 is capable of powering pedals requiring 9, 12, or 15V DC and 9, 12, or 16V AC at various current levels. Delivery includes Pedaltrain and Temple Audio mounting hardware and 16 flex power cables so you can solve your power issues immediately. Give yourself the power with CIOKS.

CIOKS CIO-AC10 Includes:

• CIOKS AC10 power supply
• Mains power cord
• 17 Flex cables:
• Type 1 – black with 5,5/2,1mm center negative DC plug x8
• Type 2 – red with 5,5/2,1mm center positive DC plug x1
• Type 4 – green with 5,5/2,5mm center positive DC plug x2
• Type 5 – black with 3,5mm tip positive Jack plug x1
• Type 6 – black with 9V battery clip x1
• Type 7 – blue with 2 pin DIN plug x1
• Split Flex type 1 – powers two pedals of a single outlet x1
• Stack Flex type 1 – white/black, adds voltages of two outlets x1
• Pedalboard mounting hardware: mounting bracket, screws, washers, stand-off and a hex key
• Manual
• Product sheet (drill guide)
• Flex guide

CIOKS CIO-AC10 Features:

• 10 outlets configured in 6 isolated sections
• Toroidal transformer with additional electromagnetic field shielding
• 2 powerful AC sections with 800mA each
• 9, 12 and 16V AC available
• One AC section convertible into a 600mA DC section
• 15V option for Radial Tonebone pedals
• Short circuit protection of all outlets
• Advanced LED monitoring of each section
• 120 or 230V mains voltage operation
• Total of 16 Flex cables in total included
• Split Flex for powering two pedals of one outlet included
• Stack Flex and Series adapter Flex for powering 18 or 24V pedals included
• Flex cable for Electro-Harmonix vacuum tube pedals included
• Compatible with Pedaltrain and Temple Audio pedalboards
• Mounting bracket and all pedalboard mounting hardware included

CIOKS CIO-AC10 Specifications:

• Outlet 1-2: 9V DC / 100mA each
• Outlet 3-4: 9 or 12V DC / 200mA each
• Outlet 5-6: 9 and 12 or 15V DC / 600mA*
• Outlet 7-8: 9 or 12V AC / 800mA*
• Outlet 9-10: 9, 12 or 16V AC / 800mA
• * only one of these two sections can be used
• Size: 158x98x35mm (excl. rubber feet)
• Weight: 1.1kg