Product Overview
With a three-channel mixer featuring XLR-1/4" combo jacks, 3.5mm and Bluetooth input options, plus 980 watts of onboard power, the PVXp12 12" loudspeaker has everything you need to provide great sound anywhere. The three input channels offer independent levels, and internal DSP provides control over crossover settings and EQ for precise tone shaping as well as limiting for system protection. Channels 1 & 2 include a Mic/Line switch to accommodate a wide range of inputs. A balanced XLR mix-out/thru jack is provided for connections to mixers or another PVXp cabinet (all sold separately). Peavey's Asymmetrical Quadratic Waveguide horn directs high frequencies toward the audience and not over their heads for more consistent coverage and a better overall blend everywhere in the room. The resilient plastic injection-molded enclosure with a heavy-duty steel grille is ready for all the performance you throw at it. Designed as a free-standing or pole-mount speaker, the AQ 15's trapezoidal enclosure will make it the singer's choice for a screaming floor wedge! Power, efficiency, sonic superiority. The Peavey PVXp12.
Peavey PVXP12-BLUETOOTH Features:
- Two-way bi-amped sound reinforcement enclosure
- RX14™ compression driver, with 1.4-inch titanium diaphragm
- Reliable fan-cooled power amps with DSP protection
- Total of 980W peak dynamic power
- DSP control for precise crossover, EQ, and limiting functions
- Bluetooth input is via a dedicated input channel
- Mix/Thru Output is via a male XLR jack
- Durable plastic injection-molded trapezoidal enclosure
- Extra angled section on right side allows floor monitor use
- Pole mount molded-in for 1 3/8" diameter poles
- Top, bottom, and right side flying point inserts
- 12 heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
- Full-coverage heavy-duty perforated steel grilles, with powder coat finish
- DSP I/O is at 48 kHz and 24 bits, internal processing is 56-bit double-precision
- Peavey's Quadratic Throat Waveguide technology, 100 by 50-degree coverage
- Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads
- Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input
- Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8 jack
- Each channel has a level control and a 3-band EQ section to adjust and shape the input signals
- Weight Packed: 46.96 lb (21.3 kg)
- Width Packed: 20" (50.8 cm)
- Height Packed: 18.25" (46.36 cm)
- Depth Packed: 26.75" (67.95 cm)
Peavey PVXP12-BLUETOOTH Specifications:
- Internal power amplifiers Power Ratings (@120 VAC line):
- Total of 980 watts peak dynamic power
- Woofer - 840 watts peak dynamic power
- Sine wave Power*: 375 watts @ less than 1% distortion
- Tweeter - 140 watts peak dynamic power
- Sine wave Power*: 50 watts @ less than 1% distortion
- Electronic Input Impedance (Nominal):
- Line: 20 k ohms balanced (1/4" and XLR), 15 k ohms unbalanced 1/4", 6.4 k ohms 1/8" jack
- Mic: 2.7 k ohms balanced (XLR) No phantom power available
- Input Sensitivity for Full Output (Channel Input Level knob full CW, Master DSP gain full-up, DSP CH1 or CH2 at 0 dB): 1/4” TRS /XLR combo jack: 0.50 V RMS See Level Control Adjustment section for more details under different channel and Main Gain settings
- DSP Specifications: DSP Input and Output are at 48 kHz and 24 bits, internal processing is 56-bit double-precision. Latency: 1.2 ms
- Infrasonic filter protection: Minimum 36 dB/octave roll-off, 48 dB/octave roll-off with adjustable input filters engaged.
- Nominal Amplifier Frequency Response: +0, -3 dB from 20 Hz to 20 kHz
- Hum and Noise: Greater than 90 dB below rated power
- Overdrive Dynamic Range: Greater than 15 dB
- THD and IM: Typically less than 0.5 %
- Power requirements of Peavey PVX™p 12 Bluetooth® System: Nominal 120 Watts, 100-120 VAC 50-60 Hz
