Angry Audio MIC-TALLY-GIZMO Driver for M!KA Mic Arms Equipped with LED Tally

Make proper use of the tally light on that beautiful new M!KA boom arm (sold separately) you bought with the Angry Audio Mic Tally Gizmo. Attach a 5-pin male XLR connector (sold separately) to the M!KA arm's cable and plug it into the Gizmo. Run a standard XLR cable (sold separately) to your console or preamp, then one or two TRRS male logic connectors (sold separately) to the Gizmo and you're in business. The audio and tally voltage go into the Gizmo to be separated and sent to their respective destinations. When a mic is live, the tally light illuminates red or white. The Mic Tally Gizmo supports up to two microphones allowing a separate color to be used for each mic. Keep your guests on the mic and on point with the Mic Tally Gizmo from Angry Audio.

Angry Audio MIC-TALLY-GIZMO Includes:

• Mic Tally Gizmo
• Power Adapter
• AC Blades: US, UK, AU, EU
• XLRF to RJ45 Adapter
• 3.5mm to screw terminal adapter (2x)

Angry Audio MIC-TALLY-GIZMO Features:

• Passes audio and tally voltage
• Controls two tally lights
• Powder-coated housing eliminates RFI
• Installs into a round grommet hole for a finished appearance
• Power, output, and logic connections on the bottom of unit

Angry Audio MIC-TALLY-GIZMO Specifications:

• Connections
  • Mic Arm Input: 5-pin XLR female jack
  • Mic Thru: 3-pin XLR male jack
  • Logic Ports: 3.5mm TRSS jack
  • Power: 15VDC input
• Power and Environmental
  • Power Input (Adapter): 100-240VAC, 50-60Hz, various plugs
  • Power Output (Adapter): 15VDC, 200mA, 3.0W
  • Tally Output: 12VDC, 80mA
  • Operating Temperature: 0º to 40º C (32º to 104º F)
  • Storage Temperature: -20º to 45º C (-4º to 113º F)
  • Relative Humidity: 0% to 90% non-condensing
• Product Weight & Dimensions
• Shipping box: 9in x 5in x 5in, 4 pounds