Product Overview
The Precision® AV Atmos Speaker Mount System by Triad-Orbit introduces an extensive range of mounting possibilities, encompassing attachment to walls, ceilings, or Triad-Orbit® IO-compatible fixtures. This distinctive, patent-pending speaker mounting system has been meticulously designed to meet the exacting requirements of Dolby Atmos installations, affording the installer an unmatched degree of versatility in mounting and alignment solutions. Consequently, it streamlines the installation process and simplifies laser alignment procedures, resulting in significant time savings.
Triad-Orbit Features:
- Speaker Compatibility: The SM-1 system incorporates a selection of speaker mounting plates designed to accommodate speakers from various manufacturers, ensuring comprehensive compatibility.
- Redundant Locking Mechanisms: To enhance stability and reliability, the system integrates dual redundant locking mechanisms.
- Precision Adjustments: The SM-1 system facilitates precise adjustments with the availability of 15-degree locking positions in both the tilt and pan axes, granting precise control over speaker orientation.
Triad-Orbit Specifications:
- System Components:
- SM-WM1 wall/ceiling mount houses the SM-SW1 swivel. The SM-SW1 slides into the SM-WM1 mount and secures by 4 hex screws. This allows the speaker to be attached to the swivel first and then sliding the assembly in the SM-WM1 mounting plate.
- SM-SW1 swivel can accommodate the various speaker mounting plates or can connect directly to speakers that have a dual hole pattern (50mm-80mm). SW-1 has spring pins in 15 degree increments as well as secondary tension locks in both tilt and pan axis.
- Speaker Brackets:
- SM-705B and SM-708B (JBL 705p/708p speakers) have five possible mounting points to allow for optimal positioning. Refer to the provided instructions for mounting options.
- Mounting Plates:
- SM-7iP (non-powered JBL 705/708 installer series) speaker plate has four (4) 50mm holes and four (4) 80mm slots for ease of mounting. This allows both vertical and horizontal orientation when attaching to the SM-SW1 swivel.
- SM-GP (Genelec) speaker plate has four (4) holes spaced 127mm X 70mm to accommodate Genelec One series speakers and (4) holes spaced 108mm X 51mm for smaller Genelec speakers. Note: Many Genelec and other speakers may connect directly to the SM-SW1 using the 50mm-80mm slotted holes.
- SM-PM1 pipe mounting plate is intended for use with standard 3/4” NTS pipe thread for long drop hanging or extending off of walls.
- SM-IOM1 is designed to be used with Triad-Orbit IO-connected components. Use with Triad-Orbit IO-GC grip clamp for truss mounting configurations.
- This list will be updated as new speaker manufacturer plates are approved for use. Contact Triad-Orbit if you do not see an intended use speaker on this list.
