Product Overview
The ClearOne BMA CT 600mm is an innovative ceiling tile beamforming microphone array that seamlessly integrates with drop ceilings. It incorporates advanced features like built-in acoustic echo cancellation, noise cancellation, and beam selection, eliminating the need for per-beam processing in a DSP mixer and reducing the demand on DSP mixer resources. This integration simplifies system design, installation, and operation while optimizing rack space utilization. For larger conference setups, up to three ceiling tiles can be interconnected using P-Link technology, allowing a cable reach of up to 1950 feet with each tile placed up to 650 feet apart. The configuration process is streamlined through a unified workflow using the Pro Console software, eliminating the need for separate component setup like Ethernet switches, BMA CT, Dante controllers, and DSP Mixers. This cohesive approach enhances efficiency and expedites the setup process, optimizing the overall system functionality.
ClearOne Includes:
- ClearOne BMA CT 600mm Ceiling Tile Beamforming Mic Array for Converge Pro 2 (White)
- Limited 3-Year Manufacturer Warranty
ClearOne Features:
- Integrated Design Reduces Complexity
- Simple to Install and Setup
- Single Workflow Pro Console Software
- Daisy-Chain Three Tiles via P-Link
- Supports Distances up to 650'
- 24 Microphones in 5 or 6 Beams
- Noise & Acoustic Echo Cancellation
- Automatic Level Control + 5 Filter Types
- PoE - Power over Ethernet
ClearOne Specifications:
- Microphone:
- 24 Microphones
- Channel In: 1 (Uses P-Link Channels or C-Link Channels for Speakers, No Input Channels in CP2)
- Number of Beams: Two patterns, either 5 or 6 Beams
- Polar Pattern: Custom
- Frequency Response: 150 Hz to 16 kHz, ±3 dB
- Dynamic Range: 150 Hz to 16 kHz, >70 dB
- Amplifier Output:
- Type: 0.2" / 5.1 mm Black Header, Male, Phoenix-Type Euroblock
- Audio: 2 Channels
- Frequency Response: 20 Hz to 22 kHz at +10 dBu, ±0.5 dB
- THD + Noise: 20 Hz to 22 kHz at +10 dBu, 1 W, < 0.2%
- Dynamic Range: 20 Hz to 22 kHz at +20 dB, >102 dB, with 20 kHz Digital Low-Pass Filter
- Crosstalk: Channel to Channel, Stimulus at +20 dBu to Receptor 10 W Output, 8-Ohm Load, 20 Hz to 22 kHz, < 60 dB
- LED:
- LED Indicator on One End of Unit: 4 Mute/Unmute Configuration with 8 Color Options, Two Blink Patterns and Warning Indications
- Configuration Beam Enable/Disable
- Acoustic Echo Cancellation (AEC) On/Off
- Noise Cancellation (NC) On/Off
- Filters:
- All Pass
- Low Pass
- High Pass
- Notch
- PEQ
- Automatic Level Control (ALC) On/Off
- Gain Adjust
- Mute On/Off
- Auto Gate/Manual Gate
- Link:
- P-Link In & Out: Proprietary Network
- Ports Type: RJ-45
- Cable: RJ45 Cat 5e/6, Expandable
- Distance: Up to 600' / 182.9 m
- Daisy-Chain: Up to 3 Array Units and Additional P-Link Compatible Devices with Each Supported CONVERGE Pro 2 Unit in the Same Chain
- Up to 6 Array Units in the Same Chain with 2 Supported Converge Pro 2 Units Connected through C-Link
- Long-Distance P-Link: Increases P-Link Distance from 200' / 61 m to 600' / 182.9 m Max Cable Distance Between Any Two Units; Cat 6, 550 MHz, 23 AWG, Solid Conductor Cable; Do Not Use Copper Clad Aluminum (CCA) Cable
- Power Switch:
- Type: Slide Switch
- Slide Toward P-Link to Power Device by P-Link
- Slide Toward PoE to Power Device by PoE Injector
- Software:
- Pro Console Software
- Power and Thermal:
- Power Type: PoE
- Port Type: RJ-45
- Power Source: PoE Injector or Equivalent
- PoE: IEEE802.3at Compliant Devices Providing 56 V and 640 mA (36 W)
- P-Link In - Mode B
- PoE In - Mode A and Mode B
- (Each BMA CT Requires Its Own 802.3at Compliant Power Injector if Loudspeakers are Being Used
- Power Consumption:
- 100-240 VAC, 50/60 Hz
- 9.1 W Typical without Speaker Amp
- 38 W at Max Power 1 kHz (2 x 10 W)
- Thermal: 130 BTU/Hr at Max Power
- Operating Temperature: 14 to 104°F / -10 to 40°C Ambient Temperature
- Dimensions:
- 23.3 x 23.3 x 0.1" / 592.5 x 592.5 x 2.1 mm
- Weight 9 lb / 4.1 kg
