Sennheiser XSW IEM Set Complete Starter Set for XSW In-ear Monitoring System

The Sennheiser XS Wireless IEM set includes all the components needed to set up a personal monitoring system in minutes. Its user-friendly design and professional sound quality delivers all the features easily!

The system includes a rugged transmitter, a lightweight bodypack receiver, IE 4 in-ear starter headphones, batteries, a power supply with multi-voltage adapter, and a rack mount kit for the transmitter.

Operating in the 476 to 500 MHz range, the XSW IEM is tuneable in 0.25 MHz increments while also offering a wide range of preset channels to cover virtually any application. The series is able to scale to meet the demands during rehearsals or live shows. Applications range from club stages to worship services. The multiple audio modes allowed for flexibility for performances and mixing demands.

The stereo receiver bodypack is designed to be lightweight and rugged. Setting options are located behind a stage-proof panel. The status LED provides battery and connection status, and the LC display features access to additional settings. You can fine-tune your preferred focus mode for in-ear monitoring, balance your mix, switch the EQ to enhance the higher frequencies, or select channel or a manual frequency.

The stereo transmitter is designed with a rugged metal housing. Adjustments can quickly be made to increase gain, check the frequency setup, or sync some more receivers for your band setup a rack mount kit and a removable antenna allow for flexible setups and many configurations.

The set also includes a pair of IE 4 in-ear headphones. With high dynamics, and included exchangeable ear sleeves for a secure and comfortable fit, you will have an isolated environment with good bass response.

Sennheiser XSW IEM Set Includes:

• XSW IEM EK Stereo Receiver
• XSW IEM SR Stereo Transmitter
• IE 4 In-ear headphones
• XSW BNC Antenna
• 2 AA batteries
• XSW Rack mount kit
• NT 12-5CW Power supply + Country Adapter
• Quick guide
• Safety Guide
• Compliance Sheet
• Frequency Table

Sennheiser XSW IEM Set Features:

• Includes all components needed to start with wireless in-ear monitoring out of the box
• Reliable and easy-to-manage wireless connection within the professional UHF range
• Multiple audio modes for flexible setups or performances
• Focus mode allows for prioritizing one input over another directly from the bodypack receiver for a user-specific monitoring experience
• Advanced features including EQ and limiter
• Frequency presets in 8 banks with 12 channels each and an option for manual tuning
• An unlimited number of receivers can be used with one transmitter
• Infrared sensor to sync multiple receivers simply to one transmitter

Sennheiser XSW IEM Set Specifications:

• Transmitter:
  • RF characteristics:
    • Modulation: FM stereo
    • Frequency ranges(max. RF output power)
    • Switching bandwidth: up to 24 MHz
    • Nominal/peak deviation: ±15 kHz / ±24 kHz
    • Antenna output: BNC socket, 50 Ω
  • AF characteristics:
    • AF frequency response 45 Hz to 15 kHz
    • AF input:
      • jack combo socket, electronically balanced
    • Total harmonic distortion (THD):
    • Signal-to-noise ratio (at nominal load and peak deviation): ≥88 dB
  • Overall device:
  • Temperature range: 0 °C to +40 °C
  • Input rating: +12 V DC
  • Current consumption: Approx. 400mA
  • Dimensions" Approx. 200 x 128 x 42 mm
  • Weight: Approx. 700 g
• Receiver:
  • RF characteristics
    • Modulation: Wideband FM
    • Frequency ranges:
    • Switching bandwidth: up to 24 MHz
    • Nominal/peak deviation: ±15 kHz / ±24 kHz
    • Squelch: 10 μV, fixed
  • AF characteristics:
    • Signal-to-noise ratio (1 mV, peak deviation): ≥88 dB
    • Total harmonic distortion (THD): ≤ 1 %
    • AF output level at 3.5 mm 2 x 1,25 Veff at 16 Ω
    • High Boost (EQ) +10 dB at 13 kHz
    • Limiter: -10 dB
    • AF frequency response: 45 Hz to 15 kHz
    • Cross talk (50 Hz - 10 kHz): typically 45 dB
  • Overall device:
  • Temperature range: 0 °C to +40 °C
  • Power supply: 2 AA batteries, 1.5 V
  • Nominal voltage: 3 V battery
  • Operating time: Approx. 6 hrs
  • Dimensions: Approx. 95 x 70 x 26 mm
• E4 - In-ear headphones:
  • Transducer: dynamic
  • Frequency response: 40-20.000 Hz
  • SPL: (1 kHz, 1 mW) 106 dB
  • Nominal impedance: 6 Ω
  • Cable length: 1.4 m
  • Connector: 3.5 mm (1/8") stereo plug, gold-plated
  • Temperature: 23 °F to 122 °F
  • Weight (incl. batteries): Approx. 110 g