DB Technologies VIO C12 12" 2-way Active Line Array Speaker

The VIO C Series from DB Technologies offers a powerful and pure acoustic performance that is a hallmark of the VIO product line. The cabinet is designed to provide the maximum amount of functionality, with horizontal or vertical line-source arrays and a rigging system that allows you to quickly set up and cover your entire venue. The VIO C12 is equipped with a 1600W RMS Class D Amp module Digipro G4, and future-proofed with an Audinate Dante card. The enclosure provides a horizontal 22.5° angle coverage pattern, allowing for a side-by-side configuration of up to 16 cabinets for 360° coverage. For additional versatility, the VIO C12 and VIO C15 models can be coupled vertically. Infrared ports embedded in the top of the cabinets will allow both speakers to communicate and be processed as one unit via the on-board display or via Aurora Net software. Each cabinet includes a removable rain cover, as well as handles on both the side and the back to ease your setup and transport.

DB Technologies VIO C12 Features:

• 2-Way active line source speaker
• Exclusively designed waveguide for maximum HF directivity control
• Neodymium components
• 1600W RMS DIGIPRO® G4 amp technology
• Full-Range SMPS with PFC
• Advanced DSP featuring linear phase FIR filters
• Fully networkable via Aurora Net
• OLED user-friendly interface
• Accessories compatible for all models

DB Technologies VIO C12 Specifications:

• Speaker Type
  • 2-Way Active Cluster Loudspeaker
• Acoustical Data
  • Usable Bandwidth [-10 dB]: 52 - 19.000 Hz
  • Frequency Response [-6 dB]: 55 - 18.000 Hz
  • Max SPL: 139 dB
  • HF: 1x 1.4”, 3” v.c. - Neodymium
  • LF: 1x 12”, 3.5” v.c. - Neodymium
  • Horizontal Directivity: 22.5°
  • Vertical Directivity: 55° (+20°/-35°)
• Amplifier
  • Amplifier: 1600 W RMS Class-D Digipro® G4
  • Cooling: Convection, Internal fan
  • Power Supply: Full-range SMPS with PFC
• Processor
  • Controller: DSP 32 bit
  • AD/DA Converter: 24 bit/96 kHz
  • Limiter: Dual Active Peak, RMS, Thermal
  • Processing (filters): FIR Linear Phase
• Input
  • Signal Input: 1x XLR female, balanced
  • Signal Output: 1x XLR male, balanced
  • Expansion Card: RDNet Card (1x RJ45 IN 1x RJ45 Link), Dante Card [Optional]
  • Power Socket:1x PowerCON TRUE1 In, 1x PowerCON TRUE1 Out
  • Controls: 1x OLED User Interface
• Special Features
  • IR positioning System
  • 380V Resistant SMPS
  • IPOS Intelligent Power-On Sequence
  • Opto-isolated floating pre-amp
  • Inclinometer
• Physical
  • Housing: Multiplex plywood - Polyurea painting
  • Handles: 4 x handles (2 on back, 1x side)
  • Rain Cover: Included
  • Rigging Points: Corner Quick Link
  • Width: 379 mm (14.92 in)
  • Height: 787 mm (30.98 in)
  • Depth: 495 mm (19.48 in)
  • Weight: 31.8 Kg (70.1 lbs)