Product Overview
Dynacord's PowerMate mixers are powerful, compact, easy to use, and designed to fit comfortably into today's digital workflows. The PM600-3 is a 2 x 1000W powered mixer with four mic/line, two mic/stereo-USB, and two stereo-line channels. You also get three auxiliary busses, with one being switchable pre/post fader allowing needed flexibility for monitor configuration.
Six discrete low-noise preamps greet your input signal and send it on to a three-band EQ for conditioning. Channels one through four also feature an 80Hz low cut to eliminate environmental rumble and transfer noise the microphones might pick up. Two integrated time-based effects processors are included with 100 factory presets. The presets can be edited and saved to twenty memory locations, offering welcome creative possibilities.
A built-in USB 24-bit / 96kHz USB audio interface delivers four channels of recording and playback to your favorite DAW. In case you don't have a favorite DAW, Dynacord threw in a Cubase LE license. A rear-panel MIDI interface lets you incorporate keyboards and controllers into the production.
The master section features a nine-band graphic EQ that can be used to tune your room for optimal mixing results. Variable speaker protection is included for passive speakers connected directly to the outputs so you can push the mix when needed.
Dynacord DC-PM600-3-MIG Includes:
- 1 x PowerMate
- 1 x Owner‘s Manual
- 1 x Mains Cord (2 meters)
- 1 x Warranty Certificate including Safety Instructions
- 1 x Instruction card for Steinberg Cubase LE
- 1 x Software license sheet for Steinberg Cubase LE
Dynacord DC-PM600-3-MIG Features:
- Mixer with 8 input channels (4 Mic/Line + 2 Mic/Stereo-USB + 2 Stereo-Line)
- Very powerful and reliable amplifier with 2 x 1.000 Watts / 4 Ohms
- 2 High-Quality editable effects, 100 factory and 20 user presets
- Professional 4x4 24-bit / 96 kHz USB interface with MIDI, please see information on available drivers
- Lightweight (9.5 kg) road-ready package with extra robust cover-lid
Dynacord DC-PM600-3-MIG Specifications:
- Channels (Mono + Stereo): 4 + 4
- Microphone Inputs (XLR): 6
- Auxiliarys (MON, FX, AUX): 1 Pre, 1 Post, 1 Pre/Post switchable
- Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
- into 2.66 Ω: 2 x 1600 W
- into 4 Ω: 2 x 1250 W
- into 8 Ω: 2 x 675 W
- Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
- into 2.66 Ω: 2 x 1350 W
- into 4 Ω: 2 x 1150 W
- into 8 Ω: 2 x 650 W
- Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
- into 2.66 Ω: 2 x 1350 W
- into 4 Ω: 2 x 1000 W
- into 8 Ω: 2 x 600 W
- Rated Output Power, 20 Hz to 20 kHz, THD < 0.5%, Single Channel
- into 4 Ω: 2 x 900 W
- into 8 Ω: 2 x 450 W
- Maximum Output Voltage, of power amplifier, 1 kHz, no load: 74 Vrms
- THD, at 1 kHz, MBW = 80 kHz
- MIC input to Master A L/R outputs, +16 dBu, typical: < 0.005%
- POWER AMP INPUTS to Speaker L/R outputs: < 0.075%
- DIM 30, power amplifier, 3.15 kHz, 15 kHz: < 0.05%
- IMD-SMPTE, power amplifier, 60 Hz, 7 kHz: < 0.15%
- Frequency Response, -3 dB, ref. 1 kHz
- Any input to any Mixer output: 15 Hz to 70 kHz
- Any input to Speaker L/R output: 20 Hz to 30 kHz
- Crosstalk, 1 kHz
- Amplifier L/R: < -85 dB
- Channel to Channel: < -80 dB
- Mute- & Standby-Switch attenuation: > 100 dB
- Fader & FX/AUX/MON-Send attenuation: > 85 dB
- CMRR, MIC input, 1 kHz: > 80 dB
- Input Sensitivity, all level controls in max. position
- MIC: -74 dBu (155 µV)
- LINE (Mono): -54 dBu (1.55 mV)
- LINE (Stereo): -34 dBu (15.5 mV)
- CD (Stereo): -34 dBu (15.5 mV)
- POWER AMP INPUTS: +8 dBu (1.95 V)
- Maximum Level, mixing desk
- MIC inputs: +11 dBu
- Mono Line inputs: +31 dBu
- Stereo Line inputs: +31 dBu
- All other inputs: +22 dBu
- All other outputs: +22 dBu
- Input Impedances
- MIC: 2 ㏀
- CD In: 10 ㏀
- All other inputs: > 15 ㏀
- Output Impedances
- Phones: 47 Ω
- All other outputs (balanced/unbalanced): 150 Ω / 75 Ω
- Equivalent Input Noise, MIC input, A-weighted, 150 ohms: -130 dBu
- Noise, Channel inputs to Master A L/R outputs, A-weighted
- Master fader down: -100 dBu
- Master fader 0 dB, Channel fader down: -92 dBu
- Master fader 0 dB, Channel fader 0 dB, Channel gain unity: -82 dBu
- Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ω: 105 dB
- Output Stage Topology, amplifier: Class D
- Equalization
- LO Shelving: ±15 dB / 60 Hz
- MID Peaking: ±12 dB / 2.4 kHz
- HI Shelving: ±15 dB / 12 kHz
- Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz): ±10 dB / Q = 1.5 to 2.5
- Filter
- LO-CUT, mono inputs: f = 80 Hz, 18 dB/oct., switchable
- Speaker Processing: LPN, switchable
- Effects
- Type: 2 x Stereo 24/48-bit multi effects processors
- Effects presets: 100 Factory + 20 User, Tap-Delay
- Remote control: Footswitch, MIDI
- Display: 128 x 64 pixels, OLED
- Digital Audio Interface
- Channels: 4 In / 4 Out
- AD/DA Conversion: 24-bit
- Sampling Rate: 44.1 / 48 / 88.2 / 96 kHz
- PC Interface: USB2.0, Female Type B
- Supported OS: See documentation
- Peak Display: 6 dB before Clip
- MIDI Interface: 5-pin DIN connector, In / Out
- Output Power Control (Speaker Protection): Adjustable longterm RMS Limiter
- Protection
- Mixer Outputs, relay controlled: AUX, MON, MASTER A L/R
- Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF
- Switching Mode Power Supply (µC controlled): Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature
- Cooling: Continuous speed controlled Fans
- Phantom Power, switchable: 48 V DC
- Power Requirements (SMPS with auto range mains input): 100 V to 240 V AC, 50 Hz to 60 Hz
- Power Consumption, at 1/8 maximum output power, 4 Ω: 450 W
- Safety Class: I
- Ambient Temperature Limits: +5 °C to +40 °C (40 °F to 105 °F)
- Dimensions (W x H x D), mm
- With optional lid: 438.8 x 161.7 x 362.5
- Rack-mount: 483 x 135.8 x 310.3 (7 HU)
- Weight
- Net Weight, without lid: 9.0 kg
- Net Weight, with optional lid: 9.5 kg
- Shipping Weight: 12 kg
- Warranty: 36 months
