Klover KM-16-HM MiK 16" Parabolic Collector with Hard Mount Bracket

The KM-16-HM parabolic collector turns your current omni or wide cardioid microphone into a long-range audio gathering tool. Designed for broadcast and law enforcement applications, the MiK-16 can increase a microphone's pickup distance by up to 250 feet in ideal conditions. This hard mount version is made for mounting on a stationary or mobile surface rather than being hand carried by an operator.

The Klover Mik 16 HM is designed from a highly reflective ballistics-grade plastic resulting in a full-range audio signal. Vibration insulation bushings have been added to all attachments and handles to eliminate operator transferred noise.

Safety is paramount at Klover so the MiK 16 HM is built from carbon fiber that cushes upon impact leaving no sharp or brittle pieces. Plus, all protruding studs have been removed from the front of the dish.

A microphone is not sold with the collector, an electronic pickup or microphone must be installed to capture audio.

Klover KM-16-HM Includes:

• Klover MiK 16 Parabolic Collector Dish without Handle
• Microphone Yoke with Lavaliere Mic Adapter
• Klover MiK 16 Hard-Mount Bracket

Klover KM-16-HM Features:

• Amplify the audio you want while minimizing unwanted ambient noise
• Capture audio from much greater distances than typical microphones
• Capture comments from audience or classroom without passing a microphone.
• Capture audio from a safe distance with out putting the sound man in danger, or in the shot

Klover KM-16-HM Specifications:

• Range: 250 to 300 feet in ideal conditions
• Amplification: Approximately 18 X
• Dimensions: 18 x 16 x 10 inches
• Dish Outside Diameter: 16 inches
• Collector Diameter: 13.5 inches
• Collector Dish Thickness: 3/16 inch
• Frequency: 40 Hz to 15 kHz
• Focus Point: 1-1/8 inch behind the inner microphone mount center hub (1-1/2 inch Behind Front Face of Collector Dish)
• Pickup Pattern: Approximately conical (20 degrees off center)
• Microphone: Omnidirectional or wide cardioid mic (lapel mics up to 5/16 inch in diameter or cylindrical/pencil mics 3/4 to 7/8 inch in diameter)
• Shipping Dimensions: 20 x 20 x 9 inches excluding accessories
• Shipping Weight: Approximately 10 pounds excluding accessories