Product Overview
The Tascam Mixcast 4 is a tabletop mixer and recorder that features independent headphone outputs, mix-minus functionality, sound effects, and more.
Tascam MIXCAST-4 Includes:
- Mixcast 4
- Power adapter PS-P1220E NUT
- Owner's manual (warranty included)
Tascam MIXCAST-4 Features:
- Mixer that supports creation and distribution of podcasts with up to 4 participants
- 4 TRS/XLR combo jack mic inputs
- Phantom power can be activated for inputs individually
- Multitrack recording directly to SD cards possible with up to 14 tracks
- 14-in/2-out USB audio interface functions
- 4 headphone output jacks with independent volume controls
- Auto Mixer function can keep output levels uniform and regulate volume without distortion
- Bluetooth connection enables wireless recording of call audio
- 8 large illuminated sound pads are easy to press and have 8 banks
- 5-inch color touchscreen enables easy and intuitive operation
Tascam MIXCAST-4 Specifications:
- Recorder specifications
- Recording media:
- SD cards (64 MB–2 GB)
- SDHC cards (4 GB–32 GB)
- SDXC cards (48 GB–512 GB)
- Recording/playback formats:
- WAV: 48 kHz, 24-bit, 2-channel stereo/14-channel poly (BWF format)
- Analog audio input ratings
- Mic input jacks (1-4):
- Connectors: XLR/TRS combo jacks
- XLR: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
- TRS: 6.3mm (1/4") standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
- Maximum input level:+10dBu(when LEVEL at min.)
- Nominal input level: −10 dBu (when LEVEL at min.)
- Minimum input level: −76.5 dBu (when LEVEL at max.)
- Gain range: 66.5 dB
- Input impedance: 2.1 kΩ
- PHONES (TRRS) 1 jack (CTIA standard)
- Connector: 3.5 mm (1/8") 4-pole mini jack
- Maximum input level:+4 dBV(when LEVEL at min.)
- Nominal input level: −16 dBV (when LEVEL at min.)
- Minimum input level: −82.5 dBV (when LEVEL at max.)
- Gain range: 66.5 dB
- Input impedance: 2 kΩ
- LINE IN (TRRS) jack (CTIA standard)
- Connector: 3.5 mm (1/8") 4-pole mini-jack
- Maximum input level: +8 dBV
- Nominal input level: −12 dBV
- Input impedance: 12 kΩ
- LINE IN L/R (balanced) jacks
- Connectors: 6.3mm (1/4") standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
- Maximum input level: +24 dBu
- Nominal input level: +4 dBu
- Input impedance: 11 kΩ
- Analog audio output ratings
- PHONES jacks (1-4)
- Connectors: 6.3mm (1/4") standard stereo jacks
- Maximum output: 45 mW + 45 mW (0.1% THD+N or less, into 32Ω load)
- PHONES (TRRS) 1 jack (CTIA standard)
- Connector: 3.5 mm (1/8") 4-pole mini-jack
- PHONES (TRRS) 1 output splits from PHONES 1 output
- LINE OUT (TRRS) jack (CTIA standard)
- Connector: 3.5 mm (1/8") 4-pole mini-jack
- Maximum output level: −25 dBu
- Nominal output level: −45 dBu
- Output impedance: 100 Ω
- MONITOR OUT L/R (balanced) jacks
- Connectors: 6.3mm (1/4") standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
- Maximum output level: +20 dBu
- Nominal output level: +0 dBu
- Output impedance: 200 Ω
- LINE OUT jack
- Connector: 3.5mm (1/8") stereo mini-jack
- Maximum output level: +6 dBV
- Nominal output level: −14 dBV
- Output impedance: 200 Ω
- Control input/output
- USB port
- Connector: USB Type-C
- Formats: USB2.0 HIGH SPEED; USB AUDIO CLASS 2.0; USB MASS STORAGE CLASS
- Audio performance
- Mic amp EIN (equivalent input noise)
- −125 dBu or less (150Ω termination, LEVEL at max.)
- Frequency response
- Mic input jacks (1-4): 20 Hz – 20 kHz: +0.3 dB/−0.3 dB (JEITA)
- S/N ratio
- 101 dB: (Mic input jacks (1-4), channel faders at 0, 20kHz SPCL LPF + A-Weight)
- Distortion
- 0.003%: (Mic input jacks (1-4), 1kHz sine wave, channel faders at 0, 20kHz SPCL LPF)
- Crosstalk: 95 dB or more
- Note: Measurement conditions conform to JEITA CP-2905B.
- Recording times (in hours: minutes)
- Recording format: 24-bit/48kHz WAV
- 14 ch.: 4 GB - 0:35; 8 GB - 1:10
- 2 ch.: 4 GB - 4:07; 8 GB - 8:15
- Note: The recording times shown above are not continuous recording times. They are total recordable times for SD/SDHC/SDXC cards.
- Bluetooth
- Output class: 2 (about 10m* unobstructed transmission distance)
- Supported profile: A2DP
- Supported A2DP codecs: SBC, AAC
- Supported A2DP content protection: SCMS-T
- *The transmission distance is an estimate. The transmission distance may vary depending on the surrounding environment and radio wave conditions.
- Computer system requirements
- Windows
- Supported operating systems: Windows 10 64-Bit
- Computer hardware requirement: Windows computer with a USB 2.0 (or higher)
- *Operation is not guaranteed using the TASCAM driver with ARM64 CPUs.
- Mac
- Supported operating systems: macOS Big Sur (11); macOS Catalina (10.15)
- Computer hardware requirements: Mac with a USB 2.0 (or higher)
- iOS/iPadOS devices
- iOS 14/iPadOS 14
- iOS 13/iPadOS 13
- Android devices
- Android 11
- Android 10
- *Compatibility has been confirmed, but this does not guarantee operation with all devices.
- Other
- Power: Dedicated AC adapter (PS-P1220E NUT), DC 12 V
- Power consumption: 12.5 W (maximum)
- Weight: 2.55 kg
- Operating temperature range: 0–40ºC
- Dimensions (WxHxD):
- Excluding protrusions: 374.8 × 56.5 × 263.6 mm
- Including protrusions: 374.8 × 71.2 × 266.7 mm