Product Overview
MIPRO's ACT-2400 Series wireless system is a cutting-edge solution for 2.4GHz challenges. The 1/2U receivers offer stable signal, extended range, and dual-tuner true digital diversity. They support 12 channels without dropouts. The ACT-24HC handheld has a condenser capsule, low handling noise, and 10-hour battery life. The ACT-2401/ACT-24HC system includes a receiver, handheld, and charging station.
MIPRO ACT-2402/ACT-24HC2 Features:
- Receiver:
- MIPRO’s Digital Diversity ACT-2400 Series wireless system addresses the industry’s 2.4GHz issues of range, signal stability and channel density
- By using an adaptive tracking algorithm, the 2400-Series skips the common Wi-Fi frequencies effectively avoiding interference from most 2.4GHz communication products
- Utilizes a 4 frequency hopping spread spectrum technique that avoids any remaining interference
- With dual tuner true digital diversity receiving, receiving distance is up to 100 meters (330 ft.) with no signal drop-out
- 12 compatible simultaneous channel operation
- 24-bit / 44.1 kHz digital audio sampling
- Lo-Cut and Flat EQ settings
- Adjustable AF gain & RF power output
- Half rack single and dual channel systems
- Receiver is enclosed in a sturdy metal case
- Front mounted antennas
- Optional rack mount hardware
- ACT-24HC Transmitter:
- 3 LEDs indicate battery status and turn red to indicate low battery
- The multi-layered metal grille protects the capsule against impact, rolling and pop noise
- Condenser cardioid capsule delivers better reliability, sensitivity and sound quality
- Proprietary capsule suspension design virtually eliminates handling noises for true natural sound reproduction
- Outstanding off axis rejection reduces feedback
- Locking on/off switch
- One-touch ACT syncs the transmitter and receiver frequency automatically
- These rechargeable transmitters deliver over 10 hours of use on a 4-hour charge. A 25-minute fast charge provides up to 1-hour operation. The included single rechargeable lithium battery can be easily removed or interchanged for charging. The included intelligent battery charger maintains a high charge capacity for up to 600 charge cycles
MIPRO ACT-2402/ACT-24HC2 Specifications:
- Receiver:
- Chassis: EIA Standard 19″ 1/2U
- Display Graphic: OLED
- Frequency Range: 2.4GHz ISM band (2.4 – 2.4835GHz)
- Preset Frequency: 12
- Frequency-hopping: Each channel has 4 preset hopping frequencies
- Receiving Mode: Dual-tuner Digital Diversity
- Audio Sampling: 24-bit / 44.1 kHz
- Sensitivity: -95 dBm
- S/N Ratio: > 115 dB(A)
- T.H.D.: 0.1 % @ 1 kHz
- Audio Frequency Response: 20 Hz – 20 kHz (-2 dB)
- Output Connectors: Balanced XLR & Unbalanced 6.3 mm (1/4 “)
- Audio Output Adjustment: 0 dB (standard), -10 – +20 dB adjustable range
- Latency: < 4.0 ms
- Antenna: 2 × 50 Ω fixed antenna
- Power Supply: External AC Power Supply
- Power Consumption: 1.6 W
- Dimensions: 210 × 44 × 180 mm / 8.3 × 1.7 × 7.1 “
- Weight: Approx. 0.75 kg / 1.7 lbs
- Operating Temperature: -10 – +60℃
- Transmitter:
- Frequency Range: 2.4GHz ISM band (2.4 – 2.4835GHz)
- Channel Set-Up: ACT Sync
- RF Output Power: 2 mW / 10 mW switchable (country dependent)
- Transmitting Mode: Frequency hopping
- Max. Audio Input: 6.5 dBV
- Battery Meter: 4-level green / red LED display
- Battery Type: ICR 18500 rechargeable lithium battery × 1
- Current Consumption: Approx. 138 mA
- Operating Time: A 25-minute fast charge provides up to 1 hour operation. Minimum 10 hours of operation per 4-hour full charge (depending on the battery quality)
- Dimensions: (Ø × L) 51× 248 mm / 2.0 × 9.8 ”
- Net Weight: Approx. 255 g / 9 oz
