Magewell Pro Capture AIO SDI/DB9/DVI USB 3.0 PCIe 2.0 x1 Card

Magewell's Pro Capture AIO is an all-in-one PCIe 2.0 x1 card capable of capturing a single channel of SDI + embedded audio, HDMI + embedded audio, DVI + audio, VGA + audio, Component + audio, Composite + audio, or S-video + audio.

It supports input video resolutions up to 2048x2048, featuring both automatic and manual selection of video and audio input sources, and it supports output resolutions up to 2048x2048 with frame rates up to 120 fps.

Not only does the Pro Capture AIO support numerous parameter formats and standards for each input type, but it also offers multiple video processing features.

Captures one of the following:

• SDI + embedded audio/analog audio
• HDMI + embedded audio/analog audio
• DVI + audio
• VGA + audio
• Component + audio
• Composite + audio
• S-video + audio

Magewell PRO-CAPTURE-AIO Includes:

• (1) Pro Capture AIO
• (1) DVI to VGA connector
• (1) DVI-I to HDMI + Component breakout
• (1) DB9 to YC + Composite + Analog Audio + Component breakout

Magewell PRO-CAPTURE-AIO Features:

• SDI/DB9/DVI input
• USB 3.0 input
• Auto Signal Detection and Support
• Powerful Video Engine
• Compatible with lots of Software
• Led Status Indicator
• High Speed Memory
• Multiple capture streams
• Low latency mode
• Multiple devices on one host

Magewell PRO-CAPTURE-AIO Specifications:

• Input Interface:
  • 1 x DVI-I Connector:
    • DVI 1.0
    • HDMI 1.4a (via breakout cable)
    • VGA (via DVI to VGA connector)
    • Component (via breakout cable)
  • 1 x DB9 Connector:
    • YC (S-Video)
    • Composite video
    • Analog audio (L+R)
    • Component video
  • 1 x BNC Connector:
  • SD/HD/3G SDI
• Output Interface:
  • PCIe 2.0 x1
• Input Video Formats:
  • Composite and YC (S-Video):
    • ADC: 12 bit
    • Standards: NTSC, PAL, SECAM
  • Component and VGA:
    • ADC: 12 bit
    • Color Formats: RGB, YCbCr (YUV)
    • Sync: separated, composite, sync-on-green (SOG), sync-on-luminance (SOY)
    • Timings: DMT, CEA, CVT, GTF
    • Sampling: 1:1 for input signals up to 165 MHz sampling rate
  • HDMI:
    • Receiver: 225 MHz
    • Color Depth: 8/10/12 bit
    • Color Sampling: RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2
    • Audio Channels: Up to 8 channels
    • Audio Standards: IEC60958, IEC61937
    • Maximum Cable Length: Up to 98' (30 m)
  • SDI:
  • Standards: SD, HD, 3Ga, 3Gb, 3Ga-DL, 3Gb-DS
  • Color Depth: 10/12 bit
  • Color Sampling: RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2
  • Audio: Up to 8 channels at 48 kHz
  • Maximum Cable Length: Up to 750' (230 m) for HD signals
• Video Processing:
  • 2 x pipelines with processing bandwidth of approximately 180 MP/sec each
  • Precision: 10 bit
• Processing:
  • Cropping, Scaling, De-Interlacing, Aspect Ratio Conversion, Color Format Conversion, Frame Rate Conversions, and OSD composition
• De-Interlacing Modes:
  • Wave, blend top & bottom field, top field only, bottom field only
• Video Color Format Conversion:
  • Color Formats: RGB, YCbCr 601, YCbCr 709, YCbCr 2020
• Video Output:
  • 400 MB/s per channel DMA bandwidth in PCIe 2.0 system
  • 200 MB/s per channel DMA bandwidth in PCIe 1.0 system
  • Support for DirectGMA (AMD) and GPUDirect (Nvidia)
• Video Output Format:
  • Resolutions: Up to 2048x2048 pixels
  • Frame Rates: Up to 120 fps (actual output frame rate can be limited by PCIe bandwidth and, at higher image resolutions, by the pixel clock of the on-board video processing hardware)
  • 4:2:0 8-bit Formats: NV12, I420, YV12
  • 4:2:2 8-bit Formats: YUY2, YUYV, UYVY
  • 4:4:4 8-bit Formats: V308, IYU2, V408, BGR24, BGR32
  • 4:4:4 10-bit Formats: V410, Y410
• Supported Operating Systems:
  • Windows: 7, 8, 8.1, 10, 2008, 2008 R2, 2012(x86 and x64)
  • Linux: based on V4L2, supports x86, x64, and arm architecture
• APIs:
  • Windows: DirectShow, DirectKS, and Wave API/DirectSound/WASAPI
  • Linux: V4L2 and ALSA
• SDK:
  • Pro Capture SDK for DirectShow for easy integration (Windows)
  • Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)
  • Additional video output formats supported via Pro Capture SDK for DirectKS
• Firmware Upgrade:
  • Multiple cards in one system can be upgraded simultaneously
  • Cards can be upgraded without a system power shutdown (in most cases, even a reboot is not needed)
  • Safe Upgrades: reverts to initial version is system or power failure occurs during upgrade
• LED Indicators:
  • Per Channel: idle, input signal locked, memory failed, or FPGA configuration failed
• Power Consumption:
  • Maximum Current at 12 V: Approximately 0.4 A
  • Maximum Current at 3.3 V: Approximately 0.3 A
  • Maximum Power Consumption: Approximately 5.4 W
• Operating Temperature: 32 to 104°F (0 to 40°C)
• Storage Temperature: -4 to 158°F (-20 to 70°C)
• Relative Humidity: 5 to 90% non-condensing
• Form Factor:
  • Normal profile PCIe x1 add-on card
  • Without PCI Bracket: 3.65 x 3.79" (92.76 x 96.24 mm)
• Packaging Info:
  • Package Weight 0.85 lb
  • Box Dimensions (LxWxH) 8.2 x 7.5 x 3.6"