Atlona Technologies AT-OME-EX-TX-WP Single Gang TX Wall Plate with USB Pass Through

Atlona AT-OME-EX-TX-WP Single Gang TX Wall Plate with USB Pass-Through

An HDBaseT transmitter for video up to 4K/60 4:2:0, along with embedded audio, control, and USB over distances up to 330 feet (100 meters) in a US one-gang wallplate form factor.

The Atlona AT-OME-EX-TX-WP is part of their Omega™ Series of integration products for modern AV communications and collaboration. It transmits RS-232 control signals and is HDCP 2.2 compliant. When paired with a matching HDBaseT receiver, the integrated USB extension is an efficient solution for connecting between USB devices at remote locations and is perfect for software video conferencing and touch or interactive displays.

The AT-OME-EX-TX-WP is equipped with a USB 2.0 host interface for a PC and a peripheral device such as a keyboard, mouse, microphone, or speakerphone. The transmitter is ideally paired with Omega Series receivers as well as switchers with HDBaseT inputs and can be remotely powered by the OME-EX-RX, OME-SR21, OME-PS62, or other Omega Series receiver or switcher.

Atlona Technologies AT-OME-EX-TX-WP Applications:

Training rooms and lecture halls – extend AV connectivity from a centrally located equipment rack to remote locations allowing presenters to easily access the system

Video conferencing- when paired with a compatible Omega Series receiver or switcher, the AT-OME-EX-TX-WP is ideal for soft codec and web-based conferencing applications, providing the ability to integrate with PCs, microphones, cameras, and speakerphones

Complete system integration – Combine the AT-OME-EX-TX-WP and OME-SE21 for a compact, comprehensive and cost-effective solution to provide 4K scaling, display control, HDBaseT link testing, and audio system interfacing provided by the receiver.

Atlona Technologies AT-OME-EX-TX-WP Includes:

• AT-OME-EX-TX-WP transmitter
• Installation guide
• Interchangeable black and white wallplates and faceplates

Atlona Technologies AT-OME-EX-TX-WP Features:

• HDBaseT™ transmitter for HDMI®, power, control, and USB
• US one-gang design for wallplate openings- includes interchangeable black or white trim kits
• USB 2.0 interfacing and extension up to 330 feet (100 meters)
• HDCP compliant
• 4K/UHD capability @ 60Hz with 4:2:0 chroma subsampling
• Remote powering over HDBaseT
• Front panel power and signal status LEDs
• Field updatable firmware via the USB port
• Also available as OME-EX-WP-KIT with the OME-EX-RX receiver

Atlona Technologies AT-OME-EX-TX-WP Specifications:

• Video:
  • HDMI Specification: HDMI 2.0, HDCP 2.2
  • TMDS Clock: 300 MHz
  • UHD/HD: 4096x2160(DCI)@60/30/24Hz, 3840x2160(UHD)@60/50/24/25/30Hz, [email protected]/24/25/29.97/30/50/59.94/60Hz, 1080i@25/29.97/30Hz, 720p@30/50/59.94/60Hz
  • VESA: 2560x2048, 2560x1600, 2048x1536, 1920x1200, 1680x1050, 1600x1200, 1600x900, 1440x900, 1400x1050, 1366x768, 1360x768, 1280x1024, 1280x800, 1280x768, 1152x768, 1024x768, 800x600, 640x480
  • Color Depth: 8-bit, 10-bit, 12-bit
  • Color Space: YUV, RGB
  • Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0
• Audio:
  • Pass-Through: PCM 2ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos®, DTS®, DTS-HD Master Audio™, DTS:X
  • Bit Depth: Up to 24-bit
  • Sample Rate: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
• USB:
  • Signal: 2.0
  • Max. Data Rate: 120 Mbps
• Connectors:
  • HDMI IN: 1 x Type A, 19-pin female
  • Host: 1 x USB Type-B
  • Device: 1 x USB Type-A
  • HDBaseT OUT: 1 x RJ45
  • RS-232: 1 x Captive screw, 3-pin
• Control:
  • CEC: Pass-through
  • RS-232: Pass-through from control system to sink device (supports baud rates from 2400 to 115200)
• Indicators:
  • Power: 1 x Green LED
  • Link: 1 x Yellow LED
• Resolution/Distance:
  • HDMI IN/OUT: 4K/UHD 15 ft. (5m), 1080p 30 ft. (10m)
  • CAT5e: 4K/UHD 295 ft. (90m), 1080p 330 ft. (100m)
  • CAT6/6a/7: 4K/UHD 330 ft (100m), 1080p 330 ft. (100m)
• Power:
  • Consumption: 11.18W (including 2.5W for USB, powered by RX)
  • USB Power: 2.5W per USB device interface
• Dimensions (H x W x D): 4.07” x1.8” x 2.63” (103.5 x 45.8 x 67mm)
• Weight: 0.4 lbs. (180g)
• Certifications: CE, RoHS, FCC