PreSonus PreSonus CDL12P Constant Directivity Loudspeaker with ABS Cabinet

The PreSonus CDL12P consists of eight 2-inch drivers aligned in a segmented circular-arc high-frequency array centered in front of a 12-inch woofer. The output of the low-frequency driver travels from the same acoustic axis as the high-frequency array so that the pattern always radiates from the center of the CDL12P. The CDL12P is ideally suited for a broader range of venue sizes, creating a far-field response almost immediately as the sound is projected from the center of the enclosure

With the CDL12P, the eight 2-inch high-frequency drivers arc over a single 12-inch woofer. The result is better sonic coherence across the entire venue, with no anomalies to compensate for via time-consuming room correction. The CDL12P’s integrated PDA-1000 500W x 500W Class D power amplifier features onboard DSP presets to facilitate and simplify arrayed configurations.

Note: The CDL12P loudspeaker is not compatible with the CDL Rigging Grid.

PreSonus PreSonus CDL12P Specifications:

• Acoustic Performance
  • Configuration: Active 2-way
  • Frequency Response (-3 dB): 48 Hz – 18 kHz
  • Frequency Response (-10 dB): 42 Hz – 19 kHz
  • Nominal Coverage (-6 dB): 120° x 20° per enclosure
  • Maximum Peak SPL: 131 dB
  • Crossover Frequency: 420 Hz
• Transducer
  • LF Transducer: 12” (2.5” voice coil)
  • HF Transducer: 8 x 2” (1” Voice Coil)
• Amplifier
  • Type: Class D
  • Total Power Output: 2000W Peak, 1000W Program (500W RMS)
  • LF Power: 1000W Peak, 500W Program (250W RMS)
  • HF Power: 1000W Peak, 500W Program (250W RMS)
  • Cooling: Free air convection
  • Rated THD:
  • Dynamic Range: 119 dB (A-weighted)
  • Bandwidth: 20 Hz - 20 kHz
  • Mains Connection: powerCON™ In and Out
• Connections and Controls
  • Input Channels: 1 Line
  • Input Connector Types: 1 XLR
  • Line Input Impedance: 40 kΩ
  • Maximum Input: +4 dBu
  • Output Connector: Direct Line Out (XLR)
  • Networking: Dante® (Audio and Control), Control (only) via Locking Ethernet
  • Controls:
    • Preset Select
    • HPF On/Off
  • Indicators: Over Temperature, Signal, -3 dB, Limiter, Clip, Network Status
• DSP
  • Effects: Compression, Limiting, Delay, 8-band EQ and preset selection via WorxControl
  • HPF: 90 Hz, 4th-order Butterworth
  • Bit Depth: 24-bit
  • Sample Rate: 48 kHz
• Enclosure
  • Material: 15mm polypropylene
  • Grille: Powder-coated steel
  • Dimensions (HxWxD): 18.5” x 20.5” x 18.25” (470 mm x 521 mm x 464 mm)
  • Unit Weight: 63 lbs. (28.6 kg)
• Safety
  • Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency
  • Transducer Protection: Limiter
• Power
  • AC Power Input: 90-260V~, 50-60 Hz
  • AC Power Consumption: (1/8 Power) 4.2 Amps
• Suspension Mounting
  • Rigging Points: Integrated Rigging (10:1 load)
  • Mounting: Dual-position pole mount (0° and 10°) 35 mm