Wooden Camera 270000 Wooden Camera - Director's Monitor Cage v3

Wooden Camera - Director's Monitor Cage v3

The Director's Monitor Cage v3 is designed to be universally compatible with any monitor up to 9 inches (measured diagonally) and attaches via top, bottom, or rear 1/4-20 mounting locations. The design provides 33% weight reduction compared to the previous model and adds additional features like a dual direction swing away bracket, quick release neck strap, dual Teradek mounting areas and carbon fiber handles.

Carbon fiber hand grips can be quickly positioned by the built-in 15mm clamps. The battery mounting plate have V-Mount and Gold Mount attachment points as well as dual direction swing away functionality for easy access to the rear of the monitor and installed wireless devices. The battery bracket can be removed when both swing clamps are loosened. The cage includes a built in baby pin clamp with locking thumbwheel for stand mounting and holes on the main brackets for attaching directly to the back of Convergent Design Odyssey and Apollo.

The included sun shade is adaptable to most monitors and snaps directly to the cage frame. The bottom of the shade is made of velcro, which can be adjusted to the proper width of the monitor and an included loop piece can be used to hook onto the bottom of the cage for a more permanent mounting of the shade.

The tool-less design of the handles allow them to be folded in for easy transport. The sun shade can also act as a protective cover. This kit also contains a padded neck strap with 4 mounting points and quick release clips, Teradek mounting areas that allows up to two wireless receivers to be mounted side by side, and a cable tie for cable management.

Wooden Camera 270000 Includes:

• Qty (6) 1/4-20 x 1/2" button head screws
• Qty (6) 1/4-20 x 3/8" button head screws
• Qty (2) Offset adapters
• Qty (4) M3 x 8mm phillips screws (for V-Mount plate)
• Qty (4) M3 x 12mm phillips screws (for Gold Mount plate)
• Qty (4) #4-40 x 1/2" socket cap screws (for Teradek receiver)
• Qty (4) M3 x 12mm pan head phillips screws (for Teradek XT/LT)
• Qty (4) M3 x 6mm socket cap screws (for Odyssey 7Q)
• Qty (1) WC Cable Tie
• Qty (1) Sun Shade
• Qty (1) Neck Strap

Wooden Camera 270000 Features:

• Compatible with:
• SmallHD: DP4, DP6, AC7, DP7, 500 Series, 700 Series, Cine 7, 702 Touch, FOCUS 5/7, and UltraBright
• TVLogic: VFM-056W/WP, VFM-058W, VFM-055A, F-7H, F-5A
• Ikan: D5, VK7i, VH8, VL5, VX9e, DH5e, DH7, D7C, S7H, S7C, S7P
• Odyssey: 7, 7Q, 7Q+
• Blackmagic: Video Assist
• Atomos: Samurai, Ninja, Shogun, Shinobi
• And more

Wooden Camera 270000 Specifications:

• Weight: 1 lb (476 g)
• Dimensions: 11" x 7" x 4" (279.4 x 177.8 x 101.6 mm)