Atlas IED AP-S15HRIP Half Rack Power Conditioner and Distribution, LAN Monitoring

Power handling on a need to know basis. The half-rack AP-S15HRIP power conditioner and distributor uses a web-based user interface (UI) that allows critical performance monitoring over your local network.

Get alerts when fault conditions occur as the S15 monitors voltage, current, temperature, and humidity. The front-panel LED display also provides a real-time visual reference for those parameters and returns the IP address of the fault unit, eliminating the need for discovery software. Five rear outlets are programmable and can be scheduled to sequence On and Off individually or in groups on a 24/7 schedule.

The AP-S15HRIP is also equipped with noise filtering to eliminate stray Radio Frequency Interference (RFI) introduced by nearby transmitters or wireless products.

A removable 2m IEC power cable is provided but the unit is designed to allow the installer to select the power cord length that is required for the application. Designed to be mounted in a half-width rack, the S15 can be mounted in a standard rack with the addition of a PA702-RMK (sold separately) rack kit.

Knowledge is power, get both with the AP-S15HRIP.

Atlas Sound AP-S15HRIP Features:

• 15A Rack Mount Power Strip with web enabled monitoring & control
• Supports LAN (Local Area Network) type networks
• On-board IP Address display
• IP discovery PC software
• 6 total AC Outlets: 5 rear panel programmable switched outlets, 1 front panel unswitched convenience outlet
• Individual outlet on/off manual switch and LED indicator (enable/disable)
• Removable 15A IEC power cord with retainer bracket
• RFI noise filtering
• Earth ground fault connection indicator
• Web user interface
• DHCP or static IP addressable
• Voltage, current, temperature and humidity monitoring capability
• Over-voltage, current, temperature and humidity alarm settings
• Each outlet can be individually managed remotely
• User-definable names for each outlet
• User-definable delay time and sequence
• Temperature setting for AC fan activation
• Fault log with reporting
• Fault reporting GPIO port
• Password protection
• APRST (Auto PING Reset)
• User-definable 24/7 schedules of individual outlets to switch devices on or off
• 2-Meter humidity/temperature probe
• AP-LEDIP display panel shows voltage, current, temperature, humidity and IP Address

Atlas Sound AP-S15HRIP Specifications:

• Power Rating: 15A IT/Audio Applications, 12A continuous
• Ethernet Connector: 10/100Mbps
• Operating Voltage: 100VAC-132VAC
• Circuit Breaker Protection: 15A
• Power Consumption: 8-Watts
• Minimum Spike Clamping Voltage: 460VRMS @ 3,000A
• Maximum Spike Clamping Voltage: 6,000V, 1 nanosecond
• Spike Clamping Voltage @ 100A: 1,250Vp for 20μs
• Maximum Surge Current: 6,500A
• Operating Temperature Range: 40º - 105ºF (5º - 40.5ºC)
• Height: 1.75" (44.5mm) 1RU
• Width: 10.5" (266.7mm) 1RU
• Depth: 8.5" (215.9mm)
• Weight: 3.5 lbs. (1.6kg)
• Shipping Weight: 5.5 lbs. (2.5kg)
• Safety Listed: UL 60950-1