Dynaudio M3VE 12" 3-way Active Studio Main Monitor System

Dynaudio offers the M3VE monitor system for Mastering, Tracking and Mixing, featuring a Bi-amped / passive crossover between mid and high.

The Dynaudio Professional M3VE monitor system takes monitoring to a whole new level with a significant upgrade from its predecessor - the renowned M3A 3-way monitor. Two speakers are powered by a single four-channel Lab.gruppen PLM 12k44 amplifier, using the integrated Lake active cross-over between LF and MF, while passively filtering the MF/HF cross-over point.

With Dynaudio ESOTAR driver technology, M3VE takes over where most other monitor systems give up. Attention to detail, underpinned by a 22Hz - 21kHz frequency response and beyond 133dB SPL, M3VE fulfills every desire in terms of resolution, range or power.

Dynaudio M3VE Features:

• Three-way main monitor
• Passive MF/HF crossover
• Handcrafted drivers
• Matched with Lab.gruppen PLM 12k44 amplifier
• For in-wall or free standing setups

Dynaudio M3VE Specifications:

• System: 3-way Active Main Monitor
• Frequency Response (±3dB): 22Hz - 21kHz
• Peak SPL 1m, pair (IEC Short Term): > 133dB peak
• Amplifier minimum: 2 x Lab.gruppen PLM10000Q
• Resonance Frequency: 24Hz
• Internal Cabinet Volume: 145 liters
• Bass Principle: Bass reflex
• Amplifier: 1/2 Lab-gruppen PLM10000Q (2 channels pr speaker). Preset: M3VE V05
• Tweeter: Esotar 28mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material
• Midranges: 15cm with 75mm diameter pure aluminum wire voice coil, one-piece molded MSP cone
• Woofer: Esotar 30cm with 75mm diameter pure copper wire voice-coil, MSP-cone, long stroke
• Weight: 65kg
• Dimensions (WxHxL): 555 x 775 x 505mm
• Cabinet: 25mm MDF, strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer.
• Crossover: Woofers/hightone: active dsp-based, in-amp Lake processor. Midrange/tweeter: passive wir air-coils only, low dielectrium capacitors and zero-compression resistors.
• Model: 12k44
• Number of amplifier channels: 4
• Max out Power per Channel (4 ohms, all channels driven): 3000W
• THD + N at 1kHz and 1dB below clipping: < 0.04 %
• Dynamic Range: > 114dB
• Channel separation (Crosstalk) at 1 kHz: > 70dB
• Inputs: Analog, AES/EBU & Dante
• Analog Input Sample Rate / Resolution: 96kHz / 24bit
• Weight: 16.5kg (36lbs)
• Dimensions (W x H x D): 483 (19") x 88 (2 U) x 424(16")