Product Overview
Crestron offers the DM-MD32X32-CPU3 32x32 DigitalMedia™ Switcher, a fully modular and expandable 32x32 DigitalMedia matrix switcher offering ultra-fast digital video and audio switching and lossless HD multi-room signal distribution for all types of AV sources.
Based on the 3-Series® platform. Provides complete management of SD, HD, UHD, 2K, 4K60 4:4:4 HDR, and computer signals with advanced HDCP support, EDID resolution management, CEC signal management, USB signal routing, integrated Ethernet switch, simultaneous 7.1 and stereo audio, H.264 streaming, and a full range of selectable input and output types.
The DM‑MD32X32‑CPU3 delivers an advanced 4K60 4:4:4 AV signal routing solution to provide the foundation for a complete DigitalMedia™ system. The DM‑MD32X32‑CPU3 affords ultra-fast switching and lossless distribution of HDMI® and other signals to support digital media players, HDTV receivers, computers, cameras and display devices.
The DM‑MD32X32‑CPU3 is configurable to handle up to 32 AV sources. The outputs are configurable to provide up to 32 DM, HDBaseT®, and/or HDMI outputs, or up to 16 H.264 streaming outputs, in a single chassis. Based on the 3‑Series® platform, the DM‑MD32X32‑CPU3 provides enterprise‑grade security.
Integrated Ethernet networking and USB distribution provide a complete connectivity solution combined with built‑in Crestron® control for managing the displays and other room devices without any additional wiring. User‑friendly operation, setup, and troubleshooting tools are provided through the DM‑MD32X32‑CPU3 front panel, or via Crestron Toolbox™ software, to allow for easy setup. A web browser interface is also provided.
Specifications
- Switcher: 32x32 digital matrix, modular input/output cards, Crestron QuickSwitch HD™ technology
- Input Signal Types: Configurable via modular plug-in cards supporting HDMI® (DVI & Dual-Mode DisplayPort compatible12), DVI, 3G-SDI, RGB/VGA, component, S-Video, composite (NTSC & PAL), DM 8G+® & HDBaseT®, DM 8G Fiber, DM 8G SM Fiber, DM® CAT (legacy), DM Fiber (legacy), & H.264 streaming
- Output Signal Types: Configurable via modular plug-in cards supporting HDMI (DVI compatible15), DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streaming (All input cards also include HDMI pass-through outputs)
- Backplane Data Rate: 12.5 Gbps
- Note: For additional specifications, refer to the DMC Series input and output card spec sheets.
- Switcher: 32x32 digital multichannel audio-follow-video matrix switching, plus independent 16x16 stereo matrix for audio breakaway
- Input Signal Types: Configurable via modular plug-in cards supporting HDMI (Dual-Mode DisplayPort compatible12), 3G-SDI, analog (stereo 2-channel), SPDIF, DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streaming
- Output Signal Types: Configurable via modular plug-in cards supporting HDMI, analog (stereo 2-channel), DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streaming (All input cards also include HDMI pass-through outputs, and most digital audio input cards also include analog stereo pass-through audio outputs)
- Note: For additional specifications, refer to the DMC Series input and output card spec sheets.
- Ethernet: 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client, Private Network Mode
- USB: USB signal routing via select input cards, transmitters, receivers, and extenders16;
- USB computer console port for setup
- DigitalMedia: DM 8G+, DM 8G Fiber, DM 8G SM Fiber, DM Fiber, DM CAT, HDCP 2.24, EDID, CEC, PoDM, PoDM+, Ethernet
- HDBaseT: HDCP 2.24, EDID, CEC, RS-232, PoH, Ethernet
- HDMI: HDCP 2.24, EDID, CEC
- Note: Supports management of HDCP and EDID; supports management of CEC between connected HDMI and HDBaseT devices and a control system.14For additional specifications, refer to the DMC Series input and output card spec sheets.
- Card Slots
- 1 –32: (32) DM switcher input card slots; Each slot accepts (1) DMC Series input card
- DM OUTPUTS 1 –32: (16) DM switcher output card slots; Each slot accepts (1) DMC Series output card
- LAN: (1) 8-pin RJ45 female; 100Base-TX/1000Base-T Ethernet port
- CONTENT: (1) 8-pin RJ45 female; 100Base-TX/1000Base-T Ethernet port; Provides a dedicated LAN connection for streaming only, used in lieu of streaming via the LAN port of the switcher or the CONTENT LAN port of a DMC Series input or output card
- SERVICE: (1) 8-pin RJ45 female; 100Base-TX/1000Base-T Ethernet port; For factory use only
- USB: (1) USB Type A connector, female; USB 2.0 host port for connection of a USB flash drive; For save/load of EDID settings and firmware update
- 100-240V~;3-1.2A 50/60Hz: (1) IEC 60320 C14 mains power inlet; Mates with removable power cord, included
- G: (1) 6-32 screw, chassis ground lug
- COMPUTER (front): (1) USB Type B female; USB computer console port (6 ft cable included)
- LCD Display: Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight, displays inputs/outputs by name, video & audio signal information, Ethernet configuration and setup menus
- SOFTKEYS: (4) Pushbuttons for activation of LCD driven functions
- HW-R: (1) Recessed pushbutton for hardware reset, reboots the switcher
- ROUTE: (1) Pushbutton and red LED, selects ROUTE mode to allow routing changes
- VIEW: (1) Pushbutton and red LED, selects VIEW mode for viewing current routes
- INFO: (1) Pushbutton and red LED, selects INFO mode for viewing AV and device info
- MENU: (1) Pushbutton, steps menu back one level
- ENTER: (1) Pushbutton, executes highlighted menu or value
- AUDIO: (1) Pushbutton and red LED, selects audio routing view
- VIDEO: (1) Pushbutton and red LED, selects video routing view
- USB: (1) Pushbutton and red LED, selects USB routing view
- Quick-Adjust Knob: (1) Continuous turn rotary encoder, adjusts menu parameters
- IN 1 –16: (16) Pushbuttons and red LEDs, each selects the corresponding input for routing
- OUT 1 –16: (16) Pushbuttons and red LEDs, each selects the corresponding output for routing
- LAN (rear): (2) LEDs; Left LED, green indicates 100Base-TX link is established, amber indicates 1000Base-T link is established; Right LED, flashing amber indicates Ethernet activity
- CONTENT (rear): (2) LEDs; Left LED, green indicates 100Base-TX link is established, amber indicates 1000Base-T link is established;
- Right LED, flashing amber indicates Ethernet activity
- SERVICE (rear): (2) LEDs; Left LED, green indicates 100Base-TX link is established, amber indicates 1000Base-T link is established;
- Right LED, flashing amber indicates Ethernet activity
- Main Power: 12-5 A @ 100-240 VAC, 50/60 Hz
- Power Consumption: 880 W typical
- Available PoDM/PoH Power: Refer to the specifications for each DM 8G+ input and output card
- Temperature: 32° to 104°F (0° to 40°C)
- Humidity: 10% to 90% RH (non-condensing)
- Heat Dissipation: 3000 BTU/Hr
- Ambient Noise:
- 30 to 34 dBA typical
- 29 to 30 dBA idle
- Chassis: Metal with black finish, vented sides, fan-cooled
- Front Panel: Metal, black finish with polycarbonate label overlay
- Mounting: Freestanding or 14 RU 19-in. (483 mm) rack-mountable (adhesive feet and rack ears included)
- Height: 24.44 in. (621 mm) without feet
- Width: 19 in. (483 mm)
- Depth: 15.75 in (400 mm) without cards
- Weight: 64.5 lb (29.3 kg) without cards
