Product Overview
Engagement is the key to success, and the Shure IntelliMix P300 Conferencing Processor is designed to drive both. It works seamlessly with Microflex Advance™ or Microflex® Wireless microphones (sold separately) and provides rock-solid audio transmission with intelligent mixing to keep the agenda on track with clear communication. With a predefined matrix and internal processor presets, the P300 offers a painless setup by reducing the lengthy commissioning time associated with other DSP-based systems. The compact unit presents a discrete footprint loaded with operational versatility, giving you the options you need and the aesthetics you want. Connectivity options provide freedom of choice when joining a room video system, whether via soft codec or standard cable connection of laptops and mobile devices. The ability to connect up to 10 Dante audio inputs, 2 analog inputs, USB, and a mobile device to an AV conferencing system or a PC-based videoconferencing application makes the P300 the ultimate hub for any conference room. And with integrated acoustic echo cancellation, noise reduction, and automatic gain control for up to 8 Dante channels, all your critical communication will be captured and transmitted with reliable accuracy. Encourage more communication, involvement, and teamwork, and enjoy better results with the Shure IntelliMix P300 Conferencing Processor.
Shure P300-IMX Includes:
- KIT, HARDWARE, P300-IMX
- BRACKET, HALF RACK UNIT
- USB cable
Shure P300-IMX Features:
- Connects 10 Dante audio inputs, 2 analog inputs, USB and a mobile device to an AV conferencing system or a PC-based videoconferencing application
- Includes Shure developed DSP algorithms to enhance audio quality in AV conferences: 8 channels of microphone processing featuring AEC, noise reduction, and automatic gain control, IntelliMix automatic mixing, matrix mixing, delay, compressor and PEQ
- Flexible signal routing and connectivity: analog audio (2 block in / 2 block out) to connect to room AV conferencing system; USB (1 in/out) to connect to laptop or room PC; one 3.5 mm TRRS jack to connect to a mobile device to enable an additional participant to join
- Power-over-Ethernet (PoE+) eliminates the need for an outboard power supply
- Compact form factor is easy to mount without equipment rack
Shure P300-IMX Specifications:
- Input: (2) 3-pin block connector (Active Balanced)
- Output: (2) 3-pin block connector (Impedance Balanced)
- Mobile: (1) TRRS 3.5 mm (1/8")
- USB Connections
- (1) USB 2.0, Type B: Single port carries 2 input and 2 output channels (Summed mono)
- Network Connections: (Dante Digital Audio) (1) RJ45: 10 Dante Inputs , 8 Dante Outputs
- Polarity: Non-inverting, any input to any output
- Power Requirements: 802.3 at Type 2 (PoE Plus), Class 4
- Power Consumption: 17.5 W, maximum
- Weight: 1710 g (3.8 lbs)
- Dimensions H x W x D: 4 x 21 x 22.6 cm (1.6 x 8.3 x 8.9 in.)
- Control Software: Shure Designer
- Operating Temperature Range: −6.7°C (20°F) to 50°C (122°F)
- Storage Temperature Range: −29°C (-20°F) to 74°C (165°F)
- Frequency Response +1, -1.5 dB: 20 to 20,000 Hz
- Dante Digital Audio
- Sampling Rate: 48 kHz
- Bit Depth: 24
- USB Audio
- Sampling Rate: 48 kHz
- Bit Depth: 16, 24
- Latency (Does not include Dante latency)
- Firmware 4.1 and newer
- Dante 1-8 in to Dante out (AEC enabled): 15.4 ms
- Dante 1-8 in to Dante out (AEC disabled): 8.7 ms
- Dante 9-10 in to Dante out: 3.4 ms
- Analog in to Analog out: 3.8 ms
- Firmware 3.1 and older
- Dante 1-8 in to Dante out (AEC enabled): 12.5 ms
- Dante 1-8 in to Dante out (AEC disabled): 5.8 ms
- Dante 9-10 in to Dante out: 1.8 ms
- Analog in to Analog out: 2.2 ms
- Analog Connections (Block Connectors)
- Dynamic Range 20 Hz to 20 kHz, A-weighted, typical
- Analog-to-Dante: 113 dB
- Dante-to-Analog: 117 dB
- Equivalent Input Noise 20 Hz to 20 kHz, A-weighted, input terminated with 150Ω
- Line: -86 dBV
- Aux: -98 dBV
- Total Harmonic Distortion @ 1 kHz, 0 dBV Input, 0 dB analog gain:
- Common Mode Rejection Ratio 150Ω balanced source @ 1 kHz: >50 dB
- Input Impedance: 9.6 kΩ
- Input Clipping Level
- Line: +27 dBV
- Aux: +15 dBV
- Output Impedance: 80 Ω
- Output Clipping Level
- Line: +20 dBV
- Aux: +0 dBV
- Mic: -26 dBV
- Pin Assignments
- Tip: Audio Input (Left)
- Ring: 1 Audio Input (Right )
- Ring: 2 Ground
- Sleeve: Audio Output (To Phone)
- Dynamic Range 20 Hz to 20 kHz, A-weighted, typical
- Analog-to-Dante: 99 dB
- Dante-to-Analog: 90 dB
- Equivalent Input Noise 20 Hz to 20 kHz, A-weighted, input terminated with 20Ω: -95 dBV
- Total Harmonic Distortion @ 1 kHz, 0 dBV Input, 0 dB analog gain:
- Input Impedance: 3.7 kΩ
- Input Clipping Level: +4 dBV
- Output Impedance: 1.4 kΩ
- Output Clipping Level Output terminated with 2.2 kΩ: -20 dBV
- Networking
- Cable Requirements: Cat 5e or higher (shielded cable recommended)
