Sound Devices MIXPRE-3-II 5-Track Audio Recorder with USB Interface

With the introduction of Sound Devices' MixPre II Series you'll be able to extend your recording limits with confidence using their series of audio recorders. The MixPre-3 II utilizes improved hardware, with 32-bit float recording, patented ultra-wide-dynamic-range A-to-D conversion, internal timecode generation, and recording up to 192 kHz sampling rates. Recorded tracks can be set to auto-copy to a USB drive for easy file transfer, and limiter parameters can now be adjusted.

If you record field audio, sound effects, audio for film, podcasts, voice-overs, music, or are just starting your audio journey, the MixPre II Series is for you! Lightweight, durable, and small, this powerhouse audio recorder and USB interface will help you capture audio for any application. With Sound Devices’ hand-crafted, crystal-clear, ultra low-noise Kashmir preamps, you’ll record audio in superior quality - all the way up to a 32-bit float bit depth and a 192 kHz sample rate. This newest generation of Sound Devices’ award-winning MixPre Series has been redesigned for increased performance and an astounding 142 dB of dynamic range.

The included full-featured internal timecode generator is accurate to better than 0.2 ppm (0.5 frames in 24 hours). When the unit is powered down, the MixPre II will maintain accurate timecode for up to four hours, even without batteries or external power. Even with its powerful new features, the MixPre-3 II boasts the same small footprint as the first generation.

Versatile. Durable. High-Performance. The MixPre II series of audio recorders.

NOTE: Some gear shown above are NOT INCLUDED and sold separately. For more information on this and other products, please contact your Sales Pro.

Includes

• MX-4AA battery sled
• MX-PSU power supply

Features

• Kashmir™ Microphone Preamps with 48 V Phantom
• Internal timecode generator
• Sample rates up to 192 kHz
• Bit depths up to 32-bit float
• Adjustable Limiters
• SD card recording and reading
• Backup to USB drive
• 10 seconds of Pre-roll at 48 kHz
• USB Control Surface support
• Customize with plugins
• Add low cut, high pass, delay, polarity invert, and panning
• Simultaneous recording, mixing, USB audio streaming
• Trigger record via timecode or HDMI timecode
• Basic, Advanced, and custom modes
• High-fidelity headphone amplifier

Specifications

• NOTE: This info is found on the MixPre-3 II Specifications Sheet in the documentation tab.