Clear-Com CC-220-B6 Lightweight Double-Ear Headset, Unterminated

The CC-220-B6 double-ear headset features a dynamic cardioid microphone offering rejection of off-axis sounds generated from the back and sides in noisy environments. The integrated adjustable headband was designed to provide comfort during long periods of use. This light-weight closed-back headset comes with a removable cable allowing for quick connector changes or in the field repairs. For convenience, the CC-220s flexible boom arm acts as an on/off mute by simply moving the arm up or down. The boom arm can also be rotated so you can wear the headset on the left or right side for flexibility. You'll get both leatherette and foam earpads allowing you to tailor the earcup to your situation and comfort level. The 220s double-ear design provides isolation from outside sounds.

The B6 designation means this headset arrives without a connector.

Features

• Light-weight
• Cardioid microphone for off axis rejection
• Closed-back double on-ear design provides isolation
• flexible mic boom arm
• Interchangeable cable
• Boom arm acts as an on/off mute switch
• Comes with both leatherette and foam earpads

Specifications

• Headphone
  • Type: Closed-back
  • Driver: 36mm diameter, neodymium magnet, copper-clad aluminum wire voice coil
  • Frequency Response: 20Hz v- 20kHz
• Microphone
  • Element: Dynamic
  • Driver: 15mm, neodymium magnet
  • Polar Pattern: Cardioid
  • Frequency Response: 250Hz – 20kHz
  • Sensitivity
  • Open Circuit Sensitivity: -64 dB ±3.5 dB; at 1kHz, typical
  • 99 dB ±3 dB (SPL); at 1kHz typical
• Power
  • Maximum: 500mW
• Connector
  • Cable: 5ft (1.55m) long with 8-pin connector at headset end;
• Impedance
  • 400 ohms ±30%; at 1kHz typical
• Dimensions
  • Packaging for CC-220:
  • 6.7 x 8 x 3.5 in (WxHxD)
  • (170 x 205 x 90 mm)
• Weight
  • 6.8 oz (195g) without 8-pin cable assembly and M3*18mm SCREW