DPA KIT-4099-DC-4C-C 4099 Classic Touring Kit with 4 Instrument Mics and Accessories

DPA Microphones provides the 4099 Classic Touring Kit with four Mics and Accessories (Loud SPL).

The loud SPL 4099 Classic Touring Kit with four Mics and Accessories from DPA includes four supercardioid microphones, four 1.6mm diameter extension cables, four XLR adapters, a guitar and a bass clip, four violin clips, two piano clips, and two cello clips delivered in a cardboard box (no cases included). This kit can be used to capture audio from several instruments in recording studios, live stages, and theater applications.

The loud SPL 4099 Instrument Microphone from DPA is a supercardioid microphone with a 5.5" gooseneck that is designed to capture audio in a variety of applications: from piano to guitar, strings to woodwinds, or brass to percussion instruments. The DPA amplifier technology offers increased performance and natural sound across the entire dynamic range. The supercardioid polar pattern allows the microphone to reject unwanted noise and accurately capture the true voice of your acoustic instrument. The 4099 requires a cable and adapter (sold separately).

Hard Cases shown are sold separately

Includes

• 4 microphones
• Gooseneck Extender
• 4 1.6mm diameter extension cables
• 4 XLR adapters
• guitar clip
• bass clip,
• 4 violin clips
• 2 piano clips
• 2 cello clips

Features

• DPA technology inside
• Supercardioid condenser microphone
• Handles high SPLs
• Superior gain-before-feedback
• Flexible and easy mounting
• Gentle and easy to mount on the instrument
• Detachable cable and a versatile gooseneck extender

Specifications

• Directional pattern: Supercardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range ± 2 dB, at 20 cm (7.9 in): 80 Hz - 15 kHz with 2 dB soft boost at 10-12 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A))
• Distortion, THD < 1%: 128 dB SPL RMS, 131 dB SPL peak
• Dynamic range: Typ. 108 dB
• Max. SPL, THD 10%: 142 dB SPL peak
• Rated output impedance: From MicroDot: 30 - 40 Ω. From DAD4099-BC or DAD6001-BC: 100 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC/DAD4099-BC XLR Adapter
• Output balance principle: Signal balanced with DAD4099-BC or DAD6001-BC XLR Adapter
• Common mode rejection ratio (CMRR)> 60 dB from 50 Hz to 15 kHz with DAD4099-BC or DAD6001-BC XLR Adapter
• Power supply (for full performance)For wireless systems Min. 5 V - max. 10 V through DPA adapter; With DAD6001-BC or DAD4099-BC: P48 (Phantom power). Will work from 12 V
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD4099-BC or DAD6001-BC XLR Adapter
• Connector: MicroDot
• Color: Black
• Weight: 27 g (0.95 oz)
• Microphone diameter: 5.4 mm (0.21 in)
• Microphone length: 45 mm (1.8 in)
• Cable length: 1.8 m (5.9 ft)
• Cable diameter: 1.6 mm (0.06 in) / 2.2 mm (0.09 in)
• Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099-BC or DAD6001-BC XLR adapter)
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%
• Gooseneck length: 140 mm (5.5 in)

Hard Cases shown are sold separately