Audio-Technica AT-LP60XBT Fully Automatic Belt-drive Turntable with Bluetooth

Now you can cut the cord—yet keep the vinyl

Retaining all the great features of the AT-LP60X fully automatic belt-drive stereo turntable, the AT-LP60XBT then adds the convenience of Bluetooth® wireless connectivity. Now you can wirelessly connect to speakers and other Bluetooth devices then listen to your turntable in one room while keeping it set up safely in another. With its CSR BT chipset, this turntable is even able to connect to devices that support the aptX® codec, which offers much-improved sound quality over the standard SBC codec. RCA output and built-on phono preamp also enable it to operate with traditional wired connectivity. Able to play both 33-⅓ and 45 RPM records, operation is easy with the automatic operation controlled by front-panel start, stop and tonearm lift buttons. The highly-compatible AT-LP60X Dual Magnet™ cartridge features an easily replaceable stylus and is integrated into the headshell for assured performance. Comes in your choice of black, white/black, and red/black.

Easy upkeep and connectivity for easy listening—time to experience the AT-LP60X-BT.

Includes

• AT-LP60XBT unit • ⅛" (3.5mm) stereo mini-plug (male) to dual RCA (male) output cable • 45 RPM adapter • Removable hinged dust cover

Features

• High-fidelity audio with Bluetooth wireless technology
• Compatible with aptX codec
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Redesigned tonearm base and headshell for improved tracking and reduced resonance
• Integral Dual Moving Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L)
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Built-in switchable phono pre-amplifier for phono- or line-level output

Specifications

• Type: Belt-drive, fully automatic turntable
• Motor: DC servo-controlled
• Speeds: 33-1/3 RPM, 45 RPM
• Turntable Platter: Aluminum
• Wow and Flutter: Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio: > 50 dB (DIN-B)
• Output Level: Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec
  • Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
  • Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
• Power Supply Requirements: 120V AC, 60 Hz, 3W
• Dimensions: 14.15" x 3.84" x 14.70"
• Replacement Stylus: ATN3600L
• Communication System: Bluetooth Version 5.0
• Output: Bluetooth Specification Power Class 2
• Maximum Communication Range: Line of sight - approx. 30' (10m)
• Compatible Bluetooth Profile: A2DP
• Support Codec: SBC, aptX