Product Overview
The AT-XP7/H combo kit from Audio-Technica consists of the AT-XP7 DJ cartridge pre-mounted on the AT-HS6BK headshell (black version).
AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges
The electromagnetic engine-body of XP-Series is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than a VM95 Series cartridge, and thus providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the 3 replacement styli of the DJ cartridge AT-XP Series, nevertheless, the engine-body of XP-Series will deliver more output voltage than VM95 Series cartridges, in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Notes:
- Typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
- The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
- The VM95 Series suspension design and compliances of VM95 Series have been designed for optimal audiophile reproduction.
Includes
- (1) AT-XP7/H Headshell/Cartridge
- (2) 11mm Installation screws
- (2) 8mm Installation screws
- (2) Washers
- (2) Nuts
- (1) Non-magnetic screwdriver
Features
- Robust, durable design for high-quality specialist DJ playback
- VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
- Tapered Aluminium Cantilever provides outstanding rigidity
- Highly rigid, lightweight polyphenylene sulfide (PPS)/glass fiber body
- 6.0 mV high-output level
- Tracking force of 2.0 g to 4.0 g (3.0 g, standard)
- Stainless wire suspension, double-layered rubber damper and tapered aluminum cantilever ensure precise tracking
- Design offers maximum stylus tip visibility
- Great tracking and channel separation for high-fidelity sound
- Universal ½"-mount headshell for 4-pin turntable cartridges
- Compatible with the replacement styli ATN-XP3 and ATN-XP5 as well (sold separately)
Specifications
- Frequency Response: 20 Hz to 20,000 Hz
- Channel Separation: 22 dB @ 1 kHz
- Vertical Tracking Force: 2.0 g to 4.0 g (3.0 g, standard)
- Stylus Construction: Bonded round shank
- Recommended Load Impedance: 47,000 Ω
- Output: 6.0 mV (1 kHz, 5 cm/sec.)
- Channel Balance: 2.0 dB (1 kHz)
- Stylus Shape: 0.3 x 0.7 mil elliptical
- Cantilever: Aluminum tapered pipe
- Mount: ½-inch
- Replacement Stylus: ATN-XP7 (note: ATN-XP3/ATN-XP5 styli also compatible - sold separately)
- Coil impedance: 6.7 kΩ (1 kHz)
- DC resistance: 990 Ω
- Recommended load capacitance: 100 to 200 pF
- Vertical tracking angle: 20°
- Dimensions, cartridge only (H x W x D): 0.68" x 0.67" x 1.20" (17.2 × 17.8 × 28.3mm)
- Weight, cartridge only: 0.22 oz. (6.2 g)
- Dimensions, cartridge and headshell (H x W x D): 0.83" x 0.84" x 2.46" (21.2 × 21.4mm × 62.4mm)
- Weight, cartridge and headshell: 0.55 oz. (15.6 g)
