Lectrosonics SRC5P Dual-Channel Slot Mount ENG Receiver

The SRc5P Dual-Channel Slot-Mount ENG Receivers from Lectrosonics consist of two separate receivers built into a single, ultra-compact housing with adapters for video camera receiver slots and for stand-alone use. They can be used when paired with a transmitter & microphone (sold separately) in various environments for ENG (Electronic News Gathering), EFP (Electronic Field Productions) and other audio applications. Each receiver features Digital Hybrid Wireless technology that provides compandor-free audio quality and compatibility with other wireless systems. The RF performance is stable over a wide temperature range, making the receiver perfectly suited in rough environmental conditions. The front panel has a menu-driven LCD interface and four membrane switches which are used to view and alter settings. In addition, the LCD window also displays the pilot-tone indicator, diversity activity, RF level, audio level, and transmitter battery status for both receivers. Furthermore, a built-in spectrum analyzer scans across the tuning range of the receiver and displays a histogram of RF activity across the band. Areas of little or no RF activity are easily recognizable. The two internal receivers can be operated separately and both have switching, antenna-combining diversity, or in tandem with ratio-diversity reception. Finally, a variety of output adapters and mounting options are available for camera-slot operation. The receivers are powered from an external 7 to 18 VDC source. The SRC5P model provides a 5-pin connector next to the control panel with audio output from both channels in addition to the camera-slot outputs.

The SRc5P Dual-Channel Slot-Mount ENG Receivers from Lectrosonics consist of two separate receivers built into a single, ultra-compact housing with adapters for video camera receiver slots and for stand-alone use. They can be used when paired with a transmitter & microphone (sold separately) in various environments for ENG (Electronic News Gathering), EFP (Electronic Field Productions) and other audio applications.

Each receiver features Digital Hybrid Wireless technology that provides compandor-free audio quality and compatibility with other wireless systems. The RF performance is stable over a wide temperature range, making the receiver perfectly suited in rough environmental conditions.

The front panel has a menu-driven LCD interface and four membrane switches which are used to view and alter settings. In addition, the LCD window also displays the pilot-tone indicator, diversity activity, RF level, audio level, and transmitter battery status for both receivers.

Furthermore, a built-in spectrum analyzer scans across the tuning range of the receiver and displays a histogram of RF activity across the band. Areas of little or no RF activity are easily recognizable. The two internal receivers can be operated separately and both have switching, antenna-combining diversity, or in tandem with ratio-diversity reception.

Finally, a variety of output adapters and mounting options are available for camera-slot operation. The receivers are powered from an external 7 to 18 VDC source. The SRC5P model provides a 5-pin connector next to the control panel with audio output from both channels in addition to the camera-slot outputs.

Lectrosonics SRC5P Features:

• Fits camera "slots," Lectrosonics Duopack adapter and Octopack multicoupler, and operates stand-alone with various adapters
• The SRC5P model provides a 5-pin connector next to the control panel with audio output from both channels in addition to the camera slot outputs
• Dual-receiver design for two channels with phase-switched diversity or single channel with ratio diversity operation
• Digital Hybrid Wireless with compatibility modes for use with other transmitters
• Tracking front-end filters for high performance in tough RF environments
• LCD with RF spectrum scanning
• SmartSquelch DSP-controlled, noise based filtering and squelch
• DSP-based pilot tone for squelch control
• IR sync port for quick transmitter setup (LMb, LT, HHa, HMa, & SSM)
• SmartTune operation for quick and confident frequency selection

Lectrosonics SRC5P Specifications:

• Operating Frequencies A1: 470.100 to 537.575 MHz
• Frequency Selection Steps: Selectable; 100 or 25 kHz
• Type of Receiver Dual conversion, superheterodyne
• IF Frequency
  • Ch.1: 248.450 MHz and 350.000 kHz
  • Ch.2: 243.950 MHz and 250.000 kHz
• Frequency Stability: ±0.001 %
• Front End Bandwidth: 20 MHz @ -3 dB
• Sensitivity:
  • 20 dB SINAD: 1.0 uV (-107 dBm), A-weighted
  • 60 dB Quieting: 2.2 uV (-100 dBm), A-weighted
• Squelch Quieting: Greater than 100 dB typical
• AM Rejection: Greater than 60 dB, 4 uV to 1 V
• Modulation Acceptance: 85 kHz
• Image and Spurious Rejection: 85 dB
• Third Order Intercept: 0 dBm
• Diversity Method: SmartDiversity phased antenna combining or Ratio Diversity using both receivers for a single audio channel
• FM Detector: Digital Pulse Counting Detector operating at 250 and 350 kHz
• RF Spectrum Analyzer: Coarse and fine scanning modes for RF spectrum site survey
• Antenna Inputs: 50 Ohms SMA female connectors
• Audio Output Connectors:
  • Interchangeable D-connector adapters for camera-slot interfaces
  • Dual TA3 male (mini XLR) balanced output adapter
  • Balanced output adapter with fixed cables
  • Front-panel TA5M with two balanced outputs (5P version)
• Audio Output Level: Adjustable -50 to +5 dBu in 1 dB steps; unbalanced output is 6 dB lower
• Audio Channel Crosstalk: -80 dB or better
• Front Panel Controls and Indicators:
  • Sealed panel with membrane switches
  • LCD monitors pilot tone; antenna phase, receiver battery level; transmitter battery status; audio level, RF level
• Audio Test Tone: 1 kHz, -50 dBu to +5 dBu output (bal); 1% THD
• Transmitter Battery Type: Selection 9 V alkaline, 9 V lithium, AA alkaline, AA lithium, NiMH
• Phase Invert: Audio output phase normal or inverted
• Compatibility Modes:
  • HYB native Digital Hybrid mode
  • M.3 non-Lectrosonics (call factory)
  • 200 Lectrosonics 200 Series
  • 100 Lectrosonics 100 Series
  • HYB/TB Digital Hybrid w/ Talkback
  • M.7 non-Lectrosonics (call factory)
  • M.6 non-Lectrosonics (call factory)
  • IFB Lectrosonics IFB
• SmartNR (Noise Reduction) Off, Norman, Full modes (available in Digital Hybrid mode only)
• Frequency Response: 32 Hz to 20 kHz (+/- 1 dB)
• THD: 0.15% (system) typical in Digital Hybrid mode
• Input Dynamic Range: 125 dB (with full Tx limiting)
• Rear Panel Controls:
  • Audio output connectors
  • External DC input
• Powering and Current Consumption:
  • Min. 7 V to max. 18 VDC; 2.2 W
  • 125 mA at 18 VDC
  • 180 mA at 12 VDC
  • 295 mA at 7 VDC
• Runtime with SRBATTSLED Adapter: 7.2 V, 2200 mAh "L" style battery will typically provide about 11 hours of operation
• Transmitter Battery: Level Tracking: LCD display with battery icon or timer readout
• Operating Temperature: -4 to 122°F (-20 to +50°C)
• Dimensions: (W x H x D) 2.68 x 0.72 x 3.52" (68 x 18 x 89 mm)
• Weight: 7 oz (195 g)