Gefen EXT-DVIKVM-LANRX A/V Extender and Distributer

Use the Gefen EXT-DVIKVM-LANRX to extend and Distribute DVI, USB, RS-232, IR, and 2-way audio over a Local Area Network using any combination of HDMI, DVI, and VGA Senders and Receivers

The DVI KVM over IP extends DVI, USB, 2-way analog audio, RS-232, and IR, over a Gigabit Local Area Network. Resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA) are supported. HDMI digital audio is also supported when using HDMI sources and displays with HDMI-to-DVI adapters. The Sender and Receiver units can be automatically or manually configured to unique IP addresses to allow the connection of multiple Senders and Receivers to the same network. Multiple Receiver units can simultaneously connect to any Sender unit within the network including the Gefen KVM over LAN products with HDMI, DVI, or VGA video, to create a virtual crosspoint matrix of just over 65,000 Sender and Receiver units total, depending on the network bandwidth and number of ports on the network switch (see Note). Any combination of HDMI, DVI, and VGA Senders and Receivers can be used**. Each Receiver unit has a built-in Ethernet switch and two additional RJ-45 Ethernet ports to allow for the connection of computers and other IP-enabled devices. USB 2.0 data rates up to 480 Mbps are supported in addition to backward-compatibility with USB 1.1. Each Receiver unit provides two USB ports with up to 500mA current draw per connector, providing access to keyboard, mouse, and other compatible devices. Bi-directional analog audio capability allows audio to be transported between the Sender and the Receiver units. The built-in mic pre-amp on the Receiver unit ensures compatibility with a variety of microphones. IR commands from the Receiver side can be extended to sources connected to any of the Senders units. RS-232 serial control can also be extended between each Sender and Receiver unit. The built-in Web server interface makes set-up and configuration simple and intuitive. The DVI KVM over IP is perfect for large scale remote workstation access and digital signage applications.

**When using HDCP-encrypted content, only HDMI Senders and Receiver units can accept and display the content.

Gefen EXT-DVIKVM-LANRX Includes:

• L-Shaped Mounting Brackets with screws
• Quick-Start Guide
• 5VDC Power Supply - 2.6 AMP - locking type- interchangeable connectors (US,UK,EU,AU) (EXT-PS526AIP-LP)

Gefen EXT-DVIKVM-LANRX Features:

• Extends DVI, USB, RS-232, bi-directional stereo analog audio, and IR over IP, using a Gigabit Local Area Network
• Any combination of HDMI, DVI, and VGA Senders and Receivers can be used together to create a "Virtual Matrix"
• Supports resolutions up to 1080p Full HD and 1920 x1200 (WUXGA)
• Supports 2 USB devices at Receiver side, with 500m A current capability per port, USB 2.0 data rates up to 480 Mbps, and backward-compatibility with USB 1.1
• Any of the Senders within a network can be accessed by any Receiver unit via a web browser on a mobile device or computer, or by using the Gefen Keyboard Switching Controller software
• Supports a total of just over 65,000 Sender and Receiver units, depending on the network bandwidth and number of ports on your network switch
• Three-port Ethernet switch built into the Receiver unit
• Switch/USB button facilitates scrolling between multiple Senders and accessing a USB host computer from multiple Receivers
• Mode button on Sender for sharpness or motion optimization of image
• Easy-to-use web server interface for quick system set-up, operation, and firmware upgrade
• Locking power supply connectors
• 1U tall, half-rack width enclosures are rack-mountable using EXT-RACK-1U
• Surface mounting brackets included

Gefen EXT-DVIKVM-LANRX Specifications:

• Dimensions:
  • Length13.3 (Inches)
  • Width8.1 (Inches)
  • Height3.6 (Inches)
  • Weight3.35 (Lbs)
• Maximum Pixel Clock: 165 MHz
• Video Input Connector (Sender): (1) DVI 29-pin, female
• Video Output Connector (Receiver): (1) DVI 29-pin, female
• Line Input (Sender): (1) 3.5mm mini-stereo jack
• Line Output (Sender): (1) 3.5mm mini-stereo jack
• Mic Input (Receiver): (1) 3.5mm mini-stereo jack
• Line Output (Receiver): (1) 3.5mm mini-stereo jack
• USB Host Interface (Sender): (1) USB Type B, female
• USB Device Connectors (Receiver): (2) USB Type A, female
• RS-232 Connector (Sender): (1) DB-9, female
• RS-232 Connector (Receiver): (1) DB-9, male
• IR Emitter (Sender): (1) 3.5mm mini-mono jack
• IR Extender (Receiver): (1) 3.5mm mini-stereo jack
• IR Extender Type: EXT-RMT-EXTIRN
• Ethernet connector (Sender): (1) RJ-45, shielded
• Ethernet connectors (Receiver): (3) RJ-45, shielded
• Mode button (Sender): (1) tact-type
• Switch button (Receiver): (1) tact-type
• Reset button (Receiver): (1) tact-type, recessed
• Link Indicator (Sender/Receiver): (1) LED, green
• Power Indicator (Sender/Receiver): (1) LED, blue
• Power Consumption (Sender / Receiver): 10W (max.)
• Dimensions (Sender / Receiver) (W x H x D): 8.4" x 1.7" x 4.5" (213mm x 43mm x 113mm)