Product Overview
The IPR2™ 5000 from Peavey® boasts 2,525 watts per channel at 2 Ω and weights in at under 7 kg. It features 2-channel independent 4th-order Linkwitz-Riley crossovers, a variable-speed fan housed in a lightweight aluminum chassis, DDT speaker protection, and the revolutionary IPR-2 class D topology.
Features
- 2900 W RMS x 1 at 2 Ω
- 1780 W RMS x 1 at 4 Ω
- 975 W RMS x 1 at 8 Ω
- 2525 W RMS x 2 at 2 Ω
- 1510 W RMS x 2 at 4 Ω
- 890 W RMS x 2 at 8 Ω
- 2-channel independent, 4-order Linkwitz-Riley crossovers
- DDT protection
- Revolutionary IPR class D topology
- Detented input controls
- Combination XLR-¼" inputs
- 4 pole twist-lock output connectors
- Ultra-light weight
- Individual signal pass ¼" jacks on each channel
- LED illuminated
- Standby, LED power present indication
Specifications
- Rated Watts:
- 2-ch x 2 Ω 3230 Watts 20ms repetitive burst / 2530 Watts 1% THD both channels driven @ 1 kHz.
- 2-ch x 4 Ω 1985 Watts 20ms repetitive burst / 1700 Watts 1% THD / 1470 Watts 0.15% THD, both channels driven @ 1 kHz.
- 2-ch x 8 Ω 1175 Watts 20ms repetitive burst / 1025 Watts 1% THD / 880 Watts 0.15% THD, both channels driven @ 1 kHz.
- Minimum Load Impedance: 2 Ω
- Maximum RMS Voltage Swing: 105 volts
- Frequency Response:
- 20 Hz - 22 kHz; +/- 0.5dB at 1 Watt
- 20 Hz - 20 kHz 2-ch x 2 Ω: < 0.5% @ 2250 Watts 20 Hz to 4 kHz, decreasing to 1640 Watts @ 20 kHz, both channels driven
- 20 Hz - 20 kHz 2-ch x 4 Ω: < 0.15% @ 1400 Watts 20 Hz to 10 kHz, decreasing to 1350 Watts @ 20 kHz, both channels driven
- 20 Hz - 20 kHz 2-ch x 8 Ω: < 0.15% @ 860 Watts 20 Hz to 4 kHz, increasing to 1000 Watts @ 20 kHz, both channels driven
- Input CMRR: > - 75 dB @ 1 kHz.
- Voltage Gain: x 40 (+32 dB)
- Crossover: 100Hz switchable 2nd-order high pass and 3rd low pass per channel.
- Crosstalk: > -60 dB @ 1 kHz @ 700 Watts power @ 8 Ω
- Hum and Noise: > -105 dB, “A” weighted referenced to rated power @ 4 Ω
- Slew Rate: > 12V/µs
- Damping Factor (8 Ω): > 210:1 @ 20 Hz - 1 kHz @ 8Ω
- Input Sensitivity: 1.95 volts +/- 3% for 1 kHz 4 Ω rated power, 1.83 volts +/- 3% for 1 kHz 2 Ω rated power
- Input Impedance: 20 kΩ, balanced and 10 kΩ unbalanced.
- Current Draw @ 1/8 in VA (Watts): 1435 (890) @ 2 Ω, 920 (525) @ 4 Ω, 625 (335) @ 8 Ω
- Current Draw @ 1/3 in VA (Watts): 3050 (2155) @ 2 Ω, 1880 (1200) @ 4 Ω, 1200 (715) @ 8 Ω
- Idle Consumption: 195 VA, 90 Watts
- Cooling: 3 temperature dependent variable speed fans.
- Controls: 2 front panel attenuators, crossover select switch for HPF, Normal and LPF
- Indicator LED: Five LED indicators per channel: Active, Signal, DDT, Temperature and DC
- Protection: Thermal, DC, subsonic, incorrect loads, under and over voltage
- Connectors:
- Inputs: Dual combination ¼"-XLR
- Outputs: Dual ¼" thru, one 2-pin and one 4-pin twist-lock connector
- Construction: 0.062” thick aluminum
- Dimensions: 3.5" x 19" x 17" behind front panel + 0.6" for handle
- Net Weight: 6.2 kg (13.6 lbs.*)
- Gross Weight: 7.9 kg (17.4 lbs.)
- Weight, Unpacked: 13.67 lbs. (6.2 kg)
- Weight, Packed: 17.42 lbs. (7.9 kg)
- Width, Packed: 21" (53.34 cm)
- Height, Packed: 21.2" (53.848 cm)
- Depth, Packed: 6" (15.24 cm)
