Clear-Com PS702 2 Channel Intercom Power Supply

The Clear-Com PS-702 is a single-rack-space, two-channel intercom power supply that supplies 2 amps at 30 volts DC to operate Clear-Com beltpacks and remote stations. This power is supplied to either or both channels, and will support up to 40 beltpacks, 10 speaker stations or 12 headset stations.

This intercom power supply comes with Clear-Com’s advanced fail-safe design that can sense the difference between a short or an overload to optimally protect itself. Power is restored in as little as 0.5 seconds, depending upon whether there was a single or multiple short or overload.

The unit also offers a convenient front panel intercom line jack, switchable to either channel. This can be quite handy for trouble-shooting or simply a time saver when quick access to either intercom line is needed. Two or more PS-702 units can be connected in parallel for increased system capacity or backup redundancy. Multiple units will automatically synchronize their response to power faults and overloads.

Clear-Com PS702 Features:

• Provides up to 2 amps in only 1RU
• Exclusive IFOS Intelligent Fault/Overload Sensing for system reset
• A+B Link switch for single channel operation
• Balanced program input with global and individual channel controls
• Built-in test tone generator for set up and diagnostics

Clear-Com PS702 Specifications:

• NOTE: This info can be found on the PS-702 Data Sheet in the documentation tab.