Horita TCD100 VITC/LTC Reader/LED Display

Combination high speed LTC and VITC time code reader with 0.8" high LED display characters suitable for viewing across a room.

• Reads LTC from 1/30 to 100 times play speed, forward and reverse. Reads VITC from pause to over 30 times play speed forward and reverse (depending on tape format).
• All switches are located at rear of unit. "Auto" LTC-VITC select mode permits unattended operation by automatically switching to VITC when LTC is not available.
• Displays hours, minutes, seconds, and frames, plus indicators for VITC or LTC, and drop/non-drop frame format
• Switch select time code/user bit display, display run/hold
• Brightness control adjusts display intensity for indoor use in a darkened room or outdoor use in bright light
• Outputs 2 volt P-P reshaped LTC when reading LTC
• Optional hardware available for wall or rackmount.