Williams AV Accessories Product Financing

The BAT 026-2 from Williams AV is a package of two (2) AA Rechargeable NiMH batteries, rated 1.2 Volt, 1500 m/A.

The BAT KT6 from Williams AV is a 3 Volt Dual Drop-in Charger Kit for body-pack receivers (sold separately) that consists of the CHG 3502 and two (2) Bat 026-2 AA batteries. Dimensions: 7" x 5" x 2-1⁄16" Weight: 1.3 lbs. Designed especia ...

The FSM (Field Strength Meter) offers a practical and cost-effective solution for precise measurement, setup, and commissioning of induction loop systems, adhering to the standards outlined in IEC60118-4. This ergonomically designed handhe ...

The TFP 062 from Williams AV is a power supply designed for use with their BluePOD® Solo AP BP2 / AP BP2 D and WaveCAST WF T5 / WF T55 D models (all sold separately).

The CHG 3512 from Williams AV is a drop-in, 12-unit charger that charges compatible transmitter and receiver units (see below) over the course of a 4-hour time span. It helps keep your transmitters and receivers organized, and saves cost o ...

The CHG 3512 PRO from Williams AV is a multi-unit, drop-in style charger that can conveniently store and charge up to 12 Williams AV receivers or transmitters (any combination) over the course of a 16-hour time span. It'll help keep your p ...

The WND 009 from Williams AV is the replacement windscreen designed specifically for their MIC 054, MIC 094, MIC 100 microphones (all sold separately).

The CHG 3502 from Williams AV is a dual-bay drop-in charger for body-pack style transmitters and receivers (see below). It includes the Power Supply. Designed especially for use with: PLR BP1 Loop receiver PPA R37 FM receiver PPA R37-8 FM ...

The TFP 036 from Williams AV is a US-type power supply (PS) designed for use with their PPA T27 transmitter (sold separately). It's a wall-style PS that features US prongs. Please note: this model cannot be used in other countries besides ...

The CCS 056 26 from Williams AV is a Large water-resistant carry case that comes with a 26-slot foam insert specially-designed for use with DigiWave 300 series devices, PPA T46 transmitter, FM, IR and Loop body-pack receivers (all sold sep ...

The CCS 056 DW 11 from Williams AV is a large water-resistant carry case that comes with an 11-slot foam insert designed for Digi-Wave transceivers and receivers (all sold separately). It's meant to replace both the CCS 030 DW and CCS 030 ...

The TFP 037 from Williams AV is a universal switching replacement/backup power supply designed specifically for use with their CHG 3512 or CHG 3512 PRO charging units (sold separately). Please note: Required line cord—WLC 004—is sold s ...

The WCA 055 from Williams AV is a 3.5mm TRS male-to-3.5mm TRS male stereo cable intended for use with their IR T1 transmitter (sold separately).

The BKT 024 from Williams AV is an omindirectional wall or ceiling mounting bracket. It's made especially for use with a single TX9 or TX90 transmitter, WIR TX75 transmitter and WIR TX75-S emitter (all sold separately). Specifications Base ...

The Williams AV BAT 010-2 is a 2-pack of disposable AAA 1.5 V alkaline batteries.

The Williams AV CCS 029 Small Accessory Briefcase is an accessory storage case that provides protection for FM and IR systems during storage and transport. It includes a detachable shoulder strap, measures 14" x 11" x 8", and weighs in at ...

The CLP 090 from Williams AV is a lapel microphone clip designed for use especially with their MIC 054 or MIC 090 lavalier microphone models (both sold separately).

The STD 005 from Williams AV is a tabletop/desktop microphone stand designed specifically for use with their MIC 027 hand-held unidirectional microphone (sold separately). STD 005 Specifications Dimensions: 4-⅛" x 5" x 1" Weight: 1.01 lb ...

The WND 006 from Williams AV is the replacement windscreen designed specifically for use with the MIC 090 plug-mount and MIC 014 omnidirectional microphones (both sold separately).

The BAT 022-2 from Williams AV is a package of two (2) AAA NiMH rechargeable batteries, rated 1.2 V, 950 mAh.

The WCA 051 from Williams AV is an XLR female to 3-pin Phoenix Contact® male audio cable. This shielded two-conductor cable is used to connect the output of the Williams AV IC-2 interpreter control console to the input of the Williams AV ...

The WND 002 from Williams AV is a replacement windscreen designed specifically for use with their MIC 014-R and MIC 054 microphones (both sold separately).

The Williams AV CCS 054 is specifically designed for protecting and transporting large Williams AV DigiWave, FM or IR systems. It comes with a lower foam insert that features 60 slots, plus an open-bay-style top insert. The slots can each ...

Replacing the previous CS 030 S offering from Williams AV, the CCS 056 S Carry Case is a Large Water resistant carry case with Limited Lifetime warranty. This case comes with a 15 slot foam insert for PPA T46 transmitter, FM, IR and Loop b ...