ART Accessories Product Financing

The ART PS8-II provides controlled power sequencing to eight rear AC outlets. Each output’s power up / power down is delayed by a fixed amount determined by the front panel user definable Sequence Delay control. This allows you to contro ...

The ART S8 can be used to split eight balanced low impedance microphone signals into 16 balanced low-impedance microphone signals (eight pairs). Each channel of the S8 provides one direct output and one transformer isolated output from a s ...

Ideal for any live PA rack, studio rack, or fixed installation where easy access to XLR inputs are required, the P16 brings all rear-mounted XLR inputs from various devices to one, convenient single space rackmountable location. The P16 sa ...

PB 4x4 features ART's "4x4" distribution on the back of the unit -- four of the eight rear outputs are 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have eight total power ou ...

Different condenser microphones specify different amounts of required phantom power. As a rule these ratings can range from 48 volts all the way down to 9 volts. Fortunately, there is some flexibility in terms of matching phantom voltage t ...

Digital circuit board for ART Digital MPA tube microphone preamplifier.

Why risk running out of batteries mid-session -- or worse, getting a phantom power 'brown-out' in the middle of a take? Why keep spending on 9V batteries at all when you can have constant, reliable power? If you have the Phantom II, you ou ...

ART SyncGen power adapter.

With its backlit linear meter for monitoring input voltage, the PS4×4 provides users with a familiar analog-style readout when monitoring voltage from a power source. It also features a backlit linear Ammeter indicating Load Current in am ...

With the ability to isolate two systems and reduce hum and ground-loop noise, the DTI Dual Transformer/Isolator from ART is a passive audio interface that uses a pair of high performance transformers to totally separate input and output si ...

Use the SPLITCom Pro to split or combine balanced low impedance microphone signals. The SPLITCom Pro provides one direct-coupled output and one isolated output from a single microphone. Applications include sending the direct output to the ...

The S8-3WAY eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations. Each channel provides on ...

This unit is a 9-volt AC power supply for the ART Tube MP microphone preamp.

LED circuit board for ART 4x4 Pro rackmount.

LED circuit board for these ART preamps: Pro MPA II Digital MPA II

The PS4X4 Pro USB power distribution system will provide the surge protection you need to keep your rack safe from disruption. The PS4X4 Pro USB is equipped with an additional internal discrete APF™ (Advanced Power Filtering) module to f ...

The SP 4x4 features a backlit linear meter to monitor input voltage, which gives the user a familiar analog style readout when monitoring voltage from a power source. The SP 4x4 also features ART's "4x4" distribution on the back of the uni ...

“Hum” in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more ...

The T8™ (Transformer Eight) a high quality totally passive audio interface that uses 8 transformers to separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The T8’s audio trans ...

The ProSplit provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or Front-Of-House mixer, with the second isolated output being sent to a monit ...

The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. Innovative low power circuitry generates the higher volt ...

VU meter for the ART TPS II tube preamplifier system.

Cooling fan for the ART SLA1 and SLA4 power amplifiers.

Power switch for ART PS4X4 power distribution console.