AEA Product Financing

Following the successful N22 model designed for singer-songwriters and project studios, the AEA N8 sounds distinctly different despite having a similar appearance to the N22. In designing the N8, AEA set out to create the most open and nat ...

AEA's 4" Long Microphone Hanger allows mics to be suspended from a hanging microphone cable.

AEA AD1 (RCA mic thread adapter) Replacement 5/8"-F to 1/2"-M pipe thread adapter for R44 series, chrome.

Allows secure mounting of two microphones in XY or close coincident pattern. Has engraved marks at 0, 90, 110 and 180 degrees. Includes three locking rings.

AEA provides the R88 15-foot Breakout Cable, which is the standard cable that comes with an R88 stereo microphone. One end of the cable has a 5-pin connector that plugs into the base of the R88 microphone. The other end has two labeled and ...

The R44C is a museum quality replica of the 1936-38 RCA 44, hand made by AEA using 1.8 micron ribbon material originally manufactured by RCA. Features a Black and silver "radio" finish with bright polished chrome grill, cushion mount, and ...

The AEA R84 is an affordable Large Ribbon Geometry (LRG) microphone suitable for use by the most demanding audio professional or hobbyist. Experienced users have discovered the R84 is an outstanding general-purpose microphone, ideally suit ...

The R92 is a Large Ribbon Geometry microphone suitable for use by the most demanding audio professional or hobbyist. Features a reduced proximity bass boost and a excellent wind blast protection which makes it suitable for close micing (6- ...

Gray twill zippered storage bag for RCA-44 series mics. Silkscreened with AEA logo.

Take care of your R44 or Classic RCA 44 microphones by transporting and storing them in these vertical storage cases. Canvas exterior, padded interior.

AEA's SMP 1M consists of a 1M wide bar, 3 SMP-S sliders, and an AEA-CP coupler. Note NOTE: The AEA-SW "dead hang" swivel adapter shown above is NOT included.

AEA's SMP 17 is a stereo microphone positioner that consists of a 17" wide bar, 3 SMP-S sliders, and an AEA-CP coupler. Note: The AEA-SW "dead hang" swivel adapter shown above is NOT included

AEA's SMP-S has laser-etched markings for 0, 30, 45, and 55 degree positioning angles. Also features a 5/8"-27 male thread and an extra-large diameter locking ring.

RCA 44 ribbon microphones remain an essential part of studio live more than 50 years after manufacturing ceased in 1955. Their open sound and accurage polar pattern are still unlike anything else available. Never harsh, the 44 flatters a b ...

AEA's AEA SW is a "dead-hang" microphone swivel adapter for use with their SMP 17 and SMP 1M stereo microphone positioners. Features 5/8"-27 hardware and comes in black.

The KU4 celebrates the legendary RCA unidirectional KU3A, a highsensitivity microphone designed for the Hollywood movie studios. Also known as a M-10001 for its manufacturing number, it was RCA’s most expensive ribbon microphone. Fewer t ...

The RPQ500 module, designed after the successful RPQ preamp, provides the same ultra-clean, high-gain signal path that has earned AEA preamps their great reputation, in a 500 series package. The RPQ500 has been enhanced with additional fea ...

The AEA R44 series microphones all share the authentic sound, feel and look of the 1936-38 RCA 44BX. They combine the 1930s US sound with British engineering from RCA that reduces the mic's weight and hum sensitivity. The R44 series microp ...

The phantom-powered N22 from AEA was designed with the needs of singer-songwriters and home studio owners in mind. Bridging the gap between vintage and modern, ribbon and condenser, studio and live, the N22 is the perfect companion for mus ...

The AEA-CP is a 5/8"-27 female coupler.

5/8" receiver to 5/8"-27 microphone thread adapter. 3.5" long and 1" diameter .

The Audio Engineering Association (AEA) N22 is the first member of AEA's NUVO series of microphones, and this stereo microphone kit includes two AEA N22s, laser-engraved template bar, two custom Nuvo windscreens and carrying case. Rooted i ...

Following the successful N22 model designed for singer-songwriters and project studios, AEA's N8 sounds distinctly different despite having a similar appearance to the N22. Conceived to render acoustic spaces as faithfully as possible, the ...

The AEA-TA1 is a 5/8"-27M to 1/4"-20F black brass adapter with full thread inside.