Lighting Control

This optional spacer for the PRE10-A from Doug Fleenor Designs is the PRE10-SPACER and is made out of anodized aluminum.

Doug Fleenor Design makes a series of Relay Packs that are controlled by DMX512. The DMX1REL20A is a single channel unit, designed to switch up to a 20 amp line voltage load, and uses a 30 amp relay. The unit is provided with two 18" 12/3 ...

The Preset 10 Architectural Two is a further development of our popular Preset 10 Architectural controller. The Preset 10 Architectural Two (PRE10A2) offers new features and different wiring options. The new features of the PRE10A2 include ...

Doug Fleenor Design's Marconi Transmitter (Marconi TX) sends 512 DMX channels (one universe) wirelessly to any number of W-DMX receivers. Up to 16 transmitters can be used in a single venue for at total of 8,192 DMX channels. The Marconi T ...

This series of selector switches was specifically designed to switch DMX512 signals. Originally designed to switch between primary and backup consoles, these switches are often used to select from two (or more) input locations. The SW1 swi ...

The Rerun Portable is a lighting control station capable of storing up to ten 40-minute shows. Shows are recorded by capturing the output of a DMX512 console. The recorded show start and end points may be trimmed non-destructively. Each sh ...

The Marconi "low voltage" (Marconi LV) is identical in performance to the Marconi SP but is powered by low voltage instead of line voltage and has only one DMX512 output. The LV is designed to mount to our LED300 power supply but can be us ...

This Rack Mount Kit adapts products that use the 8.25" Stepladder Series Chassis to a standard 19" rack. Doug Fleenor Designs RKT`1-3 Rack Kit Specifications: Width: 8" Color: Gray Connectors Mount: Front Compatibility: DFD DMX6REL1A, DMX1 ...

The Doug Fleenor Design NODE1-P is a Portable, single-gang, Ethernet-to-DMX interface, offering flexibility in mounting options. It has zero boot time and accepts ArtNet (version 3 or prior), streaming ACN (ANSI E1.31, Net3) or draft strea ...

A wall-mount architectural style lighting control station that can store 8 preset looks - or scenes, the Doug Fleenor Design Preset 8 features sliders for adjusting the light levels - one associated with each of the 8 looks. The preset loo ...

The Doug Fleenor Design DMX12ANL-DIN is a 12 channel DMX512 to analog 0-10V interface with pluggable terminal blocks for the DMX512 in and thru connections. Each analog output is capable of sourcing or sinking up to 15mA. No user adjustmen ...

The DMX12DIM ELV-JBOX from Doug Fleenor Design is a 12 channel, 100 Watt per channel dimmer pack that is fed by a single 120VAC 15A branch circuit. Each of the dimmers can be separately controlled using a DMX512-based lighting controller. ...

The Doug Fleenor Design RK8-2-S is two 8" wide gray chassis in 1U.

The DMX24DIM-JBOX is a twenty-four output dimmer mounted in a J-Box. Designed for high efficacy loads, low idle power, and minimal losses, this dimmer is well-suited for Christmas tree lighting, cue lights, signs, marquees and practicals T ...

Playback sACN (E1.31) snapshots from four universes with the PRE10E-A Ethernet Architectural control wall station. Record up to ten static snapshots from any sACN capable console, allowing you to control 2048 individual slots with the push ...

With eight analog outputs and a single DMX512 output, E8ANL-DIN is a dynamic Ethernet interface. Configure easily with the built-in webserver to connect to standard Ethernet (sAcn or ArtNet). Each of the eight 0-10V analog outputs is capab ...

The NODE16-DIN stands as a DIN-rail mounted bridging solution, seamlessly integrating Ethernet to DMX functionality. Compatible with Artistic License's Art-Net or Streaming ACN (ANSI E1.31) protocols, it offers sixteen DMX512 outputs, each ...

The 1212-DIN is Doug Fleenor's highest output splitter, with lowest per-output cost. It is a bi-directional, DIN rail mounted, DMX512/RDM, isolated splitter with a fully isolated input. The twelve outputs are separately driven, but are not ...

The DMX512 to AMX192 Converter is available in two standard configurations: either one or two AMX outputs from a single DMX input. The two configurations are identical except for the addition of a second AMX output port to handle dimmers 1 ...

The Doug Fleenor Design 1211 DMX 512 Isolated Splitter has 11 outputs from a single DMX input. Doug Fleenor Design 1211 Specifications: Input circuit: EIA-485 receiver with 120 ohmtermination resistor between +Data and -Data Input signal: ...

Doug Fleenor Design makes a series of relay packs that are controlled by DMX512. This 6-channel unit, designed to switch line voltage loads up to 15 amps, uses 30 amp relays. Line voltage input is on two 18" 12/3 SJ pigtails (one for CH 1- ...

The Doug Fleenor Design SW-1 series of selector switches was specifically designed to switch DMX512 signals. Originally designed to switch between primary and backup consoles, these switches are often used to select from two (or more) inpu ...

For the receiving end of long control runs Doug Fleenor Design recommend the DMX512 Isolation Amplifier, 121. It contains separate input and output power supplies. This allows the input circuitry to receive signals as low as 0.2 volts. The ...

The Preset 10 Portable [PRE10P] can act as a backup for any DMX512 lighting console or as a stand-alone DMX512 preset console. The PRE10P is a DMX512 playback device that can take up to ten snapshots from a DMX console and play them back a ...